Dic Operation And Displays - GMC Sierra Classic 2007 Owner's Manual

If your vehicle has an Allison Transmission
the shift lever is in the MANUAL MODE (M)
position, the DIC will display the current gear
range. The DIC will also display the gear range
as it is shifted up or down. For example, if the
gear range is currently set to 6, the DIC will
display (6) 5 4 3 2 1. When the gear range is
shifted down one time, the DIC will
display 6 (5) 4 3 2 1. See Automatic Transmission
Operation on page 138 for more information.
3
(Trip Information): Press this button to
display the odometer, trip odometers, timer, engine
hours, and selected range if your vehicle has an
®
Allison Transmission
®
.
t
and
(Fuel Information): Press this button to
display the current range, fuel used, average fuel
economy, and engine oil life.
4
(Customization): Press this button to access
the vehicle settings menu and customize the
personal settings on your vehicle.
r
(Select): Press this button to reset certain
DIC functions and set your customization settings.
Pressing any of the four DIC buttons will
acknowledge some DIC messages and clear them
from the DIC display.

DIC Operation and Displays

The Driver Information Center (DIC) comes on
when the ignition is on. After a short delay, the DIC
will display the information that was last displayed
before the engine was turned off.
The DIC has different modes which can be
accessed by pressing the four DIC buttons located
on the steering wheel. These buttons are trip
information, fuel information, customization, and
select. The button functions are detailed in
the following pages.
263