Time Zone Configuration; Checking The Time Zone - Doremi DCP-2000 User Manual

5 Time Zone Configuration

Units are by default set to Pacific Time Zone (PST or PDT). This section provides information on
how to check and/or change the time zone.
5.1

Checking the Time Zone

To confirm that the time zone of the unit is set correctly, open a terminal window by going to
•
the "Menu → System → Terminal" menu.
Type: date and then press Enter.
•
The current date, time, and time zone will be displayed (Figure 11).
•
______________________________________________________________________________________
D2K.OM.001822.DRM
Figure 11: Terminal Window with Date Displayed
Page 15 of 177
Doremi Labs
Version 1.5