Connection To An Event - Doremi DCP-2000 User Manual

14.2.1

Connection to an Event

To connect a Trigger Cue to an event, select it in the "Trigger" window and click the
•
"Connect to an event" button (Figure 183).
The following window will appear:
•
To connect the selected Trigger Cue to a GPI event, click the "General Purpose Input"
•
button of the "Events" window ( Figure 184).
The following window will appear:
•
Define the GPI line number and value to connect to the Trigger Cue and click the Ok
•
button.
The connected GPI event will then appear in the right part of the GUI.
•
To connect the selected Trigger Cue to another signal, click the "Signal" button of the
•
"Events" window ( Figure 184).
The following window will appear:
•
______________________________________________________________________________________
D2K.OM.001822.DRM
Figure 184: Events Window
Figure 185: General Purpose Input Setup Window
Page 145 of 177
Doremi Labs
Version 1.5