Messages - Panasonic SDR-S10P Operating Instructions Manual

Others
Messages
CANNOT RECORD. Oata writing to the SO card has failed.
There are no motion pictures or still pictures
recorded on the SO card.
NO DATA.
If this message appears although data is recorded
on the SO card, the condition of the card is probably
not stable.
Turn off the power and then turn it on again .
..
....
THIS CARD CANNOT An 8 MB or 16 MB SO card has been inserted in
RECORD IN VIDEO MODE.
video recording mode.
' . C
CHECK CARD.
This card is not compatible or it cannot be
recognized by the unit.
e
The write protection switch on the SO card is set to
CARD LOCKED.
LOCK. (-+ 22)
CARD FOLL.
.'
....
SCENE NUMBER lS . . FULL.
The SO card is full or the number of scenes or
programs has reached the maximum limit so no
CANNOT RECORD. THE
further data can be recorded. Delete unnecessary
NUMBER OF PROGRAM IS
scenes (-+ 70) or insert a new SD card.
FULL.
CARD DOOR OPENED. The card/battery door is open. Close it.
• When using an SO card that can be used for
motion picture recording (-+ 22)
When this message appears, it is recommended
that you format the SO card being used. (-+ 74)
ERROR OCCURRED.
When an SO card is formatted, all the data recorded
RECORDING 15 STOPPED.
on it will be deleted. Back up the data on the SO
card to a computer, etc. before formatting the SO
card .
• When using any other card
Use a Panasonic SD card or another SO card which
can be used to record motion pictures. (-+ 22)
,_.__._ "";.' ,n _. ""'''''''\
. . . . . . . . . . . . . . . . 0',"("1.,0_.-.
. ····7··· •·
101
VQT1D97