Adjusting The Lcd Monitor; Recording - Panasonic SDR-S10P Operating Instructions Manual

• Changing the display style
Press the MENU button, then select
[SETUP] ~ [DATE FORMAT] ~
desired display style and press the
cursor button in the center.
[Y/M/D]
[M/DIY]
[DIMlY]
2007.DEC.15
DEC.15.2007
15.DEC.2007
Setup
Adjusting the LCD
monitor
Adjusting the brightness
and color level
1
Press the MENU button, then
select [SETUP]
~
[LCD SET]
~
[YES] and then press the
cursor button in the center.
• The date and time function are driven
by a built-in lithium battery.
• Make sure to check the time before
recording.
• If the time display becomes [- -], the
built-in lithium battery has run down.
Use the following steps to charge the
battery. When you turn on the power
for the first time after charging, a
message asking you to set the date
and time will appear. Select [YES] and
set the date and time.
To recharge the built-in lithium battery
Connect the AC adaptor or attach the
battery to the unit and the built-in lithium
battery will be recharged. Leave the unit
as it is for approx. 24 hours and the
battery will save the date and time for
approx. 6 months. (The battery will still
be recharged even if the mode dial is set
to OFF.)
MENU
2
Press the cursor button up or
down to select the item to be
adjusted. Then, press the
button left or right to make the
adj ustment.
The bar display moves.
• Press the MENU button to exit the
menu screen.
[BRIGHTN ESS]:
Brightness of the LCD monitor
[COLOR]:
Color level of the LCD monitor
41
VQT1D97