Panasonic SDR-S10P Operating Instructions Manual page 65

Playback
• About motion picture compatibility
• This unit can play back MPEG2 formatted files.
• This unit is based on the SO-Video standard.
• When playing back motion pictures recorded on an SO card with other products on
this unit or playing back motion pictures recorded on an SO card with this unit on
other products, the picture quality may deteriorate and they may be unplayable. (The
message "CANNOT PLAY" appears.)
• No sound will be heard except during normal playback.
• If pause play is continued for 5 minutes, the screen returns to the thumbnails.
• When the amount of time recorded on the scene is short, playback may not be possible.
• When a scene is displayed as
[[!J]
on the thumbnail display, playback is not
possible.
• The power will not turn off when the LCO monitor is closed.
• The time displayed may be different from the recording time and it may take time to
show the thumbnail display when playing back motion pictures recorded on an SO
card with other products.
• The recording time is not displayed on the screen during playback of scenes
recorded on an SO card with other products.
Fast forward/rewind playback
Press and hold the cursor button on the right
during playback until fast-forward starts.
(Press and hold the cursor button left to rewind.)
Press the cursor button again to increase the speed. (The
screen display changes from ~~ to ~.)
• Normal playback is restored when you press the cursor
button up.
Slow-motion playback
1
Press the cursor button up during playback to pause the playback.
2
Press and hold the cursor button on the
right. (Slow-motion pictures will be played
back in reverse when you press and hold the
left cursor button.)
• Normal playback is restored when you press the
cursor button up.
,
)~'. 'U~f"" ~-··-·---·---rW'vwr·····-·
, - .
65
VQT1D97