Operation - Chicago Electric 62216 Owner's Manual And Safety Instructions

Operating instructions
read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
tool Set up
tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn:
Make sure that the power Switch is in the off-position and unplug the tool from
its electrical outlet before performing any procedure in this section.
attaching Sandpaper to the Backing pad
The Sanding Disc is attached by Hook and Loop
to the Backing Pad� Place the Sanding Disc on
the Backing Pad lining up the 8 holes so that
the dust can be collected into the Dust Bag�
Workpiece and Work area Set up
1� Designate a work area that is clean and well-lit�
The work area must not allow access by children
or pets to prevent distraction and injury�
2� Route the power cord along a safe route
to reach the work area without creating a
tripping hazard or exposing the power cord to
possible damage� The power cord must
reach the work area with enough extra length
to allow free movement while working�
Page 10 For technical questions, please call 1-888-866-5797.
note: Unplug the sander before
attaching Sanding Discs�
3� Secure loose workpieces using a vise or clamps
(not included) to prevent movement while working�
4� There must not be hazardous objects, such
as utility lines or foreign objects, nearby
that will present a hazard while working�
5� You must use personal safety equipment including,
but not limited to, ANSI-approved eye and hearing
protection, as well as heavy-duty work gloves�
Item 62216