Setup - Chicago Electric 62216 Owner's Manual And Safety Instructions

Setup - Before use:
read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn:
Make sure that the power Switch is in the off-position and unplug the tool from
its electrical outlet before performing any procedure in this section.
note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual�
assembly
1� Slide the Dust Bag onto the back of the
Sander� Snap it in place using firm pressure�
Functions
power
Switch
Backing pad
Item 62216 For technical questions, please call 1-888-866-5797.
2� The collection of the dust will only work if the
sandpaper has holes that line up with the 8 dust
collection holes in the Backing Pad� There are
4 other holes in the Backing Pad for the Screws
that attach the Backing Pad to the Sander�
power cord
Dust Bag
Page 9