Advertisement
Specifications
Voltage & Watts
Amps
RPM
Arbor diameter
Spindle thread
Wheel diameter
Warning!!!
Read all instructions before charging or operating the tool.
Save This Manual.
list. Keep your invoice with this manual and record your invoice number here
_________________________ for future reference.
Rules For Safe Operation
Work Area
1. Keep Work Area Clean.
2. Consider Work Environment.
expose to rain. Do not use tools in presence of flammable liquids or gases.
3. Keep Children Away.
handle tools or electrical cords.
Store Idle Equipment.
4.
Personal Safety
5. Dress Properly.
cause personal injury. Wear protective hair covering to protect long hair. Rubber gloves and non skid
footwear are recommended when working outdoors.
6. Protect Your Eyes, Ears, and Lungs.
face mask if you are producing metal filings or wood chips. Wear hearing protection during ex-
tended periods of operation. Safety equipment is available at Harbor Freight Tools.
7. Stay Alert.
Concentrate on what you are doing. Use common sense. Do not operate while
under the influence of drugs or alcohol. Read warning labels on prescription medication to determine
if the medication will impair your judgment or reflexes.
#41213
110 volts, 850 watts, 60Hz, Single Phase
6 amps / no load 2.0 / with load 2.5 / start up 3.6
2 Speeds (2800 / 3300)
7/8"
5/8" – 11
6 – 3 / 4"
You will need it for safety guidelines, operating instructions, and parts
Cluttered areas invite accidents.
Do not use power tools in damp or wet locations. Do not
All children should be kept away from work area. Do not let them
When not in use store tools in a high, dry, locked location.
Do not wear loose clothing or jewelry that can be caught in moving parts and
Wear safety glasses. Wear a dust mask. Use a full
2
Advertisement
