Chicago Electric 62216 Owner's Manual And Safety Instructions page 11

Sanding instructions
tO preVent SeriOuS inJury: Grip the tool firmly in both hands.
1� Wipe the work surface clean of all dirt and debris,
especially that of previous coarser sanding
sessions, which will scratch the surface
of a finer grit sanding session�
2� Make sure that the Power Switch is in
the off-position, then plug in the tool�
3� To start, grip the tool firmly with both
hands and press the Power Switch�
Press the Power Switch to stop the tool�
4� Wait until the tool has reached full speed,
then gently contact the surface�
5� Keep heavy pressure off of the tool when operating�
Allow the tool to do the work�
Item 62216 For technical questions, please call 1-888-866-5797.
6� Move the tool in a uniform pattern up and down or
side to side while sanding to ensure even sanding�
7� Periodically, stop the tool and check for disc wear�
Replace worn Sanding Discs as needed�
8� Empty the dust bag frequently and after use�
9� tO preVent acciDentS, aFter uSe:
Turn off the tool�
WarninG! allow the tool to come to a
complete stop before setting it down.
Unplug the tool� Clean, then store the
tool indoors out of children's reach�
Page 11