Midi Menu - Clavia NordStage2 EX 88 User Manual

44 | Nord Stage 2 eX USer MaNUal oS v1.7X
FX Delay Mode
This sets if the delay should change the pitch on sounding repeats in
the fashion of an analog delay, if the Rate/Tempo knob is adjusted, or
not. When set to Normal, the pitch does not change if the Rate/Tempo
is changed.
Range: Analog (Default), Normal

MIDI Menu

Hold Shift and press Program 3/MIDI to access the MIDI menu set-
tings. Use the Page 3 and 4 buttons to navigate between the various
menu items on the MIDI menu. The Value Dial is used to change set-
tings, the Slot buttons to switch between A and B where applicable.
When you are done, press Exit (Shift) to exit the menu.
An asterisk (*) will appear in the display to alert you that a selected
MIDI channel for a section is already being used by another sec-
tion.
MIDI Control Local
MIDI Local control determines if the Nord Stage 2 EX keyboard and
front panel controls should control internal instruments and programs
or only transmit MIDI. Local On is the normal "play mode". In Local Off
mode, the front panel and keyboard actions are transmitted via MIDI
only and do not control the internal sound(s) directly.
Range: On (Default), Off
M Local always defaults back to Local On every time the Nord Stage
2 EX is powered on.
MIDI Global Channel
This sets the transmitting and receiving MIDI channel for the Global
Channel. The Global Channel transmits all keyboard, pedal and panel
actions as MIDI signals. It can also be used as a receiving channel with
full control of the entire Stage 2 EX.
Range: MIDI 1-16, USB1-USB16, Off (Default USB 1)
MIDI Slot A/B Channel
This sets the receiving MIDI channel for Slot A/B.
Range: MIDI 1-16, USB1-USB16, Off (Default Off, Slot A and B)
MIDI Organ A/B Channel
This sets the receiving MIDI channel for the Organ section A/B. If a
channel is selected here, you can assign the corresponding instrument
to no KB Zone at all, that is make it active but available only through
MIDI.
Range: MIDI 1-16, USB1-USB16, Off (Default off)
MIDI Piano A/B Channel
This sets the receiving MIDI channel for the Piano section A/B. If a
channel is selected here, you can assign the corresponding instrument
to no KB Zone at all, that is make it active but available only through
MIDI.
Range: MIDI 1-16, USB1-USB16, Off (Default off)
MIDI Synth A/B Channel
This sets the receiving MIDI channel for the Synth section A/B. If a
channel is selected here, you can assign the corresponding instrument
to no KB Zone at all, that is, make it active but available only through
MIDI.
Range: MIDI 1-16, USB1-USB16, Off (Default off)
MIDI Dual KB Channel
This sets the MIDI channel for receiving MIDI from an external keyboard
when using Dual KB mode - see page 15.
Range: MIDI 1-16, USB1-USB16 (Default MIDI 16)
MIDI Ctrl Change Mode
This allows you to set if you want your Nord Stage 2 EX to transmit
and/or receive MIDI Controller Messages or not on the Global channel.
Range: Off, Send, Receive, Send & Receive (Default)
MIDI Prog Change Mode
This settiing determines whether your Nord Stage 2 EX transmits and/
or receives MIDI program Change Messages, on the Global channel.
M This applies to the "internal" Programs in the Stage 2 EX, not the
program change messages that the Extern section can be set to
transmit.
Range: Off, Send, Receive, Send & Receive (Default)
Send MIDI Ctrl
You can perform a dump of all parameters as their MIDI Controllers for
the selected Slot. Hit Store to perform the transmission.
Range: Slot A, Slot B
Dump Program
This allows you to do a MIDI System Exclusive dump of the currently
selected Program or of all the 400 Programs of the internal memory.
The Live buffers are not included. Press the Store button to start the
transmission.
Range: One, All
Dump Synth
This allows you to do a MIDI System Exclusive dump of the current
Synth settings in the focused Slot or of all the 300 synth sounds in the
Synth memory. Press the Store button to start the transmission.
Range: Slot A/B, All