Table of Contents
Advertisement
7
The Menus
Any settings that you change in the System, MIDI, Sound or Pedal menus will take immediate effect on a global basis, and the settings will be stored
until you change them the next time . Enter the menus by pressing and holding Shift and the System, MIDI, Sound or Pedal button (program but-
tons 1 to 4) . Select a function with the Up/Down buttons and change the setting by pressing and holding Shift and the Up or Down button . Exit the
menus by pressing a second time on the program buttons or on the Shift/Exit button .
M
There is one exception, one menu setting that doesn't get automatically stored when you power off the Piano 2 HP, and this is the MIDI Local
On/Off setting. This always reverts to Local On every time the Nord Piano 2 HP is powered up.
System Menu
Memory Protect – On, Off
This is set to "On" when the Nord Piano 2 HP leaves the factory, mean-
ing that you (or a "cousin") cannot store any changes to the programs .
Set this to Off when you wish to store your own programs . The System,
MIDI or Sound menu settings and the Live memory are not protected by
this setting .
Range: On (default), Off
Fine Tune
This allows you to fine tune the pitch of the Nord Piano 2 HP .
Range: +/- 50 cent (default = 0).
Global Transpose
This allows you to transpose the entire Nord Piano 2 HP in semitone
steps . Any setting you make here will be added to the panel transpose
that may be saved with the programs .
Range: +/- 6 semitones (default = 0).
MIDI Menu
MIDI Channel
This sets the MIDI Channel that the Nord Piano 2 HP transmits and
responds to . Use the USB channel settings if you want to transmit and
receive keyboard and panel MIDI messages via the USB interface .
Range: 1-16, USB1 - USB16, Off (default = USB 1)
Local Control
This allows you to set if the Nord Piano 2 HP keyboard and front
panel controls should control internal Programs or only send note and
controller messages via MIDI . Local On is the normal "mode" . In Local
Off mode, the front panel and keyboard action are transmitted via MIDI
only and does not control the internal sounds or functions directly .
Range: On (default), Off
M
Local defaults back to Local On every time the Nord Piano 2 HP is
powered on.
Control Change (CC) Mode
This setting specifies how the front panel's knobs and buttons are han-
dled in the MIDI communication with MIDI Control Change messages .
You can select if the panel controls should either send or receive, or
both or if Control Change messages should be ignored .
Range: Send/Recv (default), Receive, Send, Off
Program Change Mode
Specifies how the Nord Piano 2 HP should handle MIDI Program
Change messages .
Range: Send/Recv (default), Receive, Send, Off
Send CC
You can send a package of all the active Program's parameters as
MIDI Control Change messages . Press the Store button to perform the
transmission .
CHaPter7tHeMeNUs
| 19
Advertisement
Table of Contents
