Audio Connections; Monitor In - Clavia NordStage2 EX 88 User Manual

Table of Contents

Advertisement

54 |
Nord Stage 2 eX USer MaNUal oS v1.7X
I
Appendix: Connections
/ LATCH

Audio connections

Headphones
This is where you connect a ¼" stereo connector from a pair of head-
phones.
Audio Outputs 1-4
The four audio outputs (CH Out 1-4) are line level and unbalanced.
If you wish to connect the Nord Stage 2 EX in stereo to your audio
equipment, you should use CH1 and CH2 outputs. Use audio cables
with ¼" connectors for connections to an amplifier or recording equip-
ment.
You can also route individual instruments to CH outputs 3 & 4 either
in stereo or as two mono channels. This is done in the System Menu,
read more on this on "System Menu" on page 42.
General guide on audio connections:
• Make all the connections before you turn on the power to your amplifier.
• Turn on the power to your amplifier last.
• Turn off the power to your amplifier first.
E
Playing at a high volume level can result in hearing impairments
such as permanent hearing loss.

Monitor In

Use this input for routing a signal from a metronome, smart phone,
computer or similar device to the Nord Stage 2 EX's headphone out-
put. This allows you to e.g. rehearse to pre-recorded music.
M
Signals connected to this input will not be processed with the
Stage 2 EX's effects or appear at the line level output jacks1-4.
USB Connection
The USB connection is used for the Nord Stage 2 EX to communi-
cate with a personal computer in order to update the OS or to add or
replace any of the samples or piano sounds. The computer can run the
Nord Sound Manager application, or be used to transfer the operating
system if the unit needs to be updated.
The Nord Stage 2 EX can transmit and receive MIDI data via the USB
interface.
M
Computers running Microsoft Windows operating systems need
a driver for the USB connection to work. The will be installed au-
tomatically if the computer is connected to the Internet when you
connect the Nord Stage 2 EX to it. A manual installer for the driver
can be found on the enclosed Nord DVD, or at the
www.nordkeyboards.com website.
MIDI Connections
MIDI In
MIDI connection used to receive MIDI data to the Nord Stage 2 EX
from other equipment such as keyboards or computers.
MIDI Out
MIDI connection used for sending keyboard- and panel generated MIDI
data from the Nord Stage 2 EX to other equipment such as sound
modules or computers.
MONITOR INPUT

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nordstage2 ex compactNordstage2 ex hp76

Table of Contents