Vibrato; Swell Control; Rotary Speaker - Clavia NordStage2 EX 88 User Manual

26 | nOrd Stage 2 eX USer ManUal OS v1.7X
The illustration below shows the pitch interval between each voice
when the key of C3 is played. Though some voices have the same
pitch, they differ in tonal character.
C3

Vibrato

The original instrument has two basic vibrato modes; "Light" and
"Heavy", with different rates for each mode. There are several types
of vibrato and choruses available for the Farf model in the Stage 2 EX,
which are activated using the On button in the Vibrato section.
The V1, V2 and the V3 settings are the ones that are modeled after
the original instrument's. Note that the Farf vibrato is common for both
Slots.

Swell Control

Swell is a characteristic feature that you control from an continuous
pedal. Swell is not only a volume control - for the B3 it also changes
the character of the sound in a special way. To use Swell control on
the Nord Stage 2 EX, simply plug in a standard expression pedal to the
Organ Swell input on the rear panel (see page 55) and configure the
pedal on the System Menu (see page 42).
An expression pedal connected to the Organ Swell input will control
Swell for all organ models.
If you have only one expression pedal, it can be used both as a generic
Control Pedal to control the Morph, and as a Swell Pedal. This is
selected in the System Menu, see page 43.

Rotary Speaker

The Rotary Speaker controls are logically placed next to the Organ sec-
tion. The Rotary Speaker and its settings are described in detail in the
Effects Reference on page 39.