Final Installation - Viking Range 5 Series Installation Manual

Anti-tip Device Installation
(cont.)
4
1
Attach bracket with
mounting hardware provided.

Final Installation

Note: Refer to range electrical
requirements section for proper
installation information.
2
Install island trim. Attach with four screws provided.
20
1
Connect electrical in shaded area. See the "Electrical
Requirements" section for more information.
3
Slide range into place. Be sure anti-tip
bracket slides into the anti -tip opening.
4
" " "
3 / 8 3 / 8 3 / 8
) ) )
c m c m c m
9 5 9 5 9 5
( 0 . ( 0 . ( 0 .
Check that unit is level side to side
and front to back. The side trim must be 3/8" (0.95 cm)
above countertop. If unit is not level repeat steps 5-7
of "Leveling/Adjustments/Alignment" section.
21