Symbol DS4308 Product Reference Manual page 34

2 - 6 DS4308/DS4308P Digital Scanner Product Reference Guide
Mounting the Stand (optional)
You can attach the base of the scanner's stand to a flat surface using two screws or double-sided tape (not
provided).
Two screw-mount holes
Mounting the Stand
Figure 2-3
Screw Mount
Position the assembled base on a flat surface.
1.
Screw one #10 wood screw into each screw-mount hole until the base of the stand is secure (see
2.
2-3).
Tape Mount
Peel the paper liner off one side of each piece of tape and place the sticky surface over each of the three
1.
rectangular tape holders.
Peel the paper liner off the exposed sides of each piece of tape and press the stand on a flat surface until
2.
it is secure (see
Double-sided tape areas
(3 places)
dimensions = 1" x 2")
Figure 2-3).
Figure