Parameters - Symbol DS4308 Product Reference Manual

12 - 4 DS4308/DS4308P Digital Scanner Product Reference Guide

Parameters

This section describes the parameters controlling the IDC firmware and provides programming bar codes for
setting them.
To set parameters requiring a range of values, scan the parameter bar code followed by two, three, or four bar
codes from Appendix G, Numeric Bar Codes
for parameters with a maximum value of less than 100, for example,
Time requires scanning three digits since the maximum value is 200. Leading zeros are required.
Alternatively, use the sample application to set parameters using the parameter name. The application
provides prompts and error checking to assist in setting the parameters correctly and easily. You must use an
application to set a parameter to a negative value, as the
Intelligent Document Capture (IDC) Parameter Defaults
Table 12-1
Parameter
Intelligent Document Capture (IDC)
IDC Operating Mode
IDC Symbology
IDC X Coordinate
IDC Y Coordinate
IDC Width
IDC Height
IDC Aspect
IDC File Format Selector
IDC Bits Per Pixel
IDC JPEG Quality
IDC Find Box Outline
IDC Minimum Text Length
IDC Maximum Text Length
IDC Captured Image
Brighten
IDC Captured Image
Sharpen
IDC Border Type
IDC Delay Time
IDC Zoom Limit
IDC Maximum Rotation
corresponding to the desired value. Scan two numeric bar codes
Parameter Name
DocCap_MODE
DocCap_SYMBOLOGY
DocCap_X
DocCap_Y
DocCap_WIDTH
DocCap_HEIGHT
DocCap_ASPECT
DocCap_FMT
DocCap_BPP
DocCap_JPEG_Qual
Sig_FINDBOX
DocCap_MIN_TEXT
DocCap_MAX_TEXT
Sig_BRIGHTEN
Sig_SHARPEN
DocCap_BORDER
DocCap_DELAY
Sig_MIN_PERCENT
Sig_MAX_ROT
IDC Minimum Text
IDC X Coordinate can require.
Parameter SSI
Number Number
594 F1h 52h
655 F1h 8Fh
596 F4h F1h 54h
597 F4h F1h 55h
598 F1h 56h
599 F1h 57h
595 F1h 53h
601 F1h 59h
602 F1h 5Ah
603 F1h 5Bh
727 F1h D7h
656 F1h 90h
657 F1h 91h
654 F1h 8Eh
658 F1h 92h
829 F2h 3Dh
830 F2h 3Eh
651 F1h 8Bh
652 F1h 8Ch
Length. IDC Delay
Page
Default
Number
Off 12-5
001 12-6
-151 12-7
-050 12-7
0300 12-8
0050 12-8
000 12-9
JPEG 12-9
8 BPP 12-10
065 12-10
Disable 12-11
00 12-11
00 12-12
Enable 12-12
Enable 12-13
None 12-14
000 12-15
000 12-15
00 12-16