Rts Line State; Beep On <Bel - Symbol DS4308 Product Reference Manual

8 - 16 DS4308/DS4308P Digital Scanner Product Reference Guide

RTS Line State

This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select Low RTS or
High RTS line state.
*
Host: Low RTS
Beep on <BEL>
If you enable this parameter, the digital scanner issues a beep when it detects a <BEL> character on the
RS-232 serial line. <BEL> indicates an illegal entry or other important event.
Beep On <BEL> Character
(Enable)
Host: High RTS
*
Do Not Beep On <BEL> Character
(Disable)