Decode Upc/Ean/Jan Supplementals - Symbol DS4308 Product Reference Manual

11 - 12 DS4308/DS4308P Digital Scanner Product Reference Guide

Decode UPC/EAN/JAN Supplementals

Parameter # 16 (SSI # 10h)
Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2,
EAN 13+2). The following options are available:
•
If you select Ignore UPC/EAN with Supplementals, and the digital scanner is presented with a
UPC/EAN plus supplemental symbol, the digital scanner decodes UPC/EAN and ignores the
supplemental characters.
•
If you select Decode UPC/EAN with Supplementals, the digital scanner only decodes UPC/EAN
symbols with supplemental characters, and ignores symbols without supplementals.
•
If you select Autodiscriminate UPC/EAN Supplementals, the digital scanner decodes UPC/EAN
symbols with supplemental characters immediately. If the symbol does not have a supplemental, the
digital scanner must decode the bar code the number of times set via
Redundancy on page 11-15
•
If you select one of the following Supplemental Mode options, the digital scanner immediately transmits
EAN-13 bar codes starting with that prefix that have supplemental characters. If the symbol does not
have a supplemental, the digital scanner must decode the bar code the number of times set via
UPC/EAN/JAN Supplemental Redundancy on page 11-15
there is no supplemental. The digital scanner transmits UPC/EAN bar codes that do not have that prefix
immediately.
• Enable 378/379 Supplemental Mode
• Enable 978/979 Supplemental Mode
NOTE If you select 978/979 Supplemental Mode and are scanning Bookland EAN bar codes, see
Enable/Disable Bookland EAN on page 11-11
Bookland ISBN Format on page
• Enable 977 Supplemental Mode
• Enable 414/419/434/439 Supplemental Mode
• Enable 491 Supplemental Mode
• Enable Smart Supplemental Mode - applies to EAN-13 bar codes starting with any prefix listed
previously.
• Supplemental User-Programmable Type 1 - applies to EAN-13 bar codes starting with a 3-digit
user-defined prefix. Set this 3-digit prefix using
• Supplemental User-Programmable Type 1 and 2 - applies to EAN-13 bar codes starting with either
of two 3-digit user-defined prefixes. Set the 3-digit prefixes using
on page
• Smart Supplemental Plus User-Programmable 1 - applies to EAN-13 bar codes starting with any
prefix listed previously or the user-defined prefix set using
page 11-15.
• Smart Supplemental Plus User-Programmable 1 and 2 - applies to EAN-13 bar codes starting with
any prefix listed previously or one of the two user-defined prefixes set using
Supplementals on page
NOTE To minimize the risk of invalid data transmission, select either to decode or ignore supplemental
characters.
before transmitting its data to confirm that there is no supplemental.
11-15.
11-15.
before transmitting its data to confirm that
to enable Bookland EAN, and select a format using
11-23.
User-Programmable Supplementals on page
User-Programmable Supplementals on
UPC/EAN/JAN Supplemental
User-Programmable Supplementals
User-Programmable
11-15.