Table of Contents
Advertisement
6
Operating
6.1 Starting up the device
Follow these steps to put the device into operation:
1.
Check to see whether all laser safety precautions have been taken. Make sure that
nobody is in range of the laser beam.
2.
If not already done, connect the power adapter of the device to a mains power outlet.
3.
Connect the DC supply cable of the power adapter to the '12DC' socket (6) of the device.
Fan and motors start working after some seconds, the laser beam turns on. The unit is
now operational.
4.
If the unit does not turn on, press the [MODE] button (2) on the device or the [ON/OFF]
button (20) on the remote control, until the LED (5) lights up.
picoLase Firefly
Operating
25
Advertisement
Table of Contents
