Phonak iCube II User Manual page 12

5. Connecting iCube II to your computer
Switch iCube II on and the connection will be
established automatically as soon as Phonak Target is
started.
The USB adapter is pre-paired with iCube II. After
replacement of either the adapter or iCube II,
a manual pairing is required as described below.
Manual pairing
Switch iCube II on and press the pairing
for 2 seconds to start the pairing mode.
When in pairing mode, all indicator lights will rapidly
blink back and forth. In Phonak Target, go to Settings,
Fitting device
select
iCube II via USB adapter
Go to
assistant. It will guide you through the pairing process.
A manual pairing is also required after a reset to
factory settings.
12
Enable iCube
and check
and start the
button
II.
Pairing