Operating Time; Switching Icube Ii On And Off; Target Fitting Software Requirements - Phonak iCube II User Manual

4. Getting started

4.3 Operating time

Fully charged, your iCube II will operate for up to twelve
hours of continuous fitting.

4.4 Switching iCube II on and off

Slide the switch as
shown to switch iCube II
on or off.
Once iCube II is fully operational, the middle
indicator light will blink slowly.
Switch iCube II off when not in use and while
charging. The middle indicator light will stop
blinking.

4.5 Target fitting software requirements

Before using iCube II, ensure that Phonak Target™ 4.0
or a later version is installed on the fitting PC.
10
Off On