Specifications - Williams 2696541 Owner's Operation And Installation Manual

SPECIFICATIONS

Btu(available)
Gas Type
Ignition
Pressure Regulator setting
Inlet Gas Pressure* (inches of water)
Maximum
Minimum
Dimensions, Inches (HxWxD)
Heater
Carton
Weight (pounds)
Heater
Shipping
Note: Dimensions listed are outer most points on the heater (includes control knobs and grill).
* For purposes of input adjustment.
REPLACEMENT PARTS
Note: Use only original replacement
parts. This will protect your warranty
coverage for parts replaced under
warranty.
PARTS UNDER WARRANTY
Contact authorized
whom you purchased this product.
If they are unable to supply original
replacement part(s), call the number
on the front of this manual. When
contacting your dealer or Williams
Furnace, have ready:
 your name
 your address
 model and serial numbers of
your heater
 how heater was malfunctioning
 type of gas used (propane/LP or
natural gas)
 purchase date
 warranty card
Usually, we will ask you to return the
defective part to the factory.
PARTS NOT UNDER
WARRANTY
Contact authorized dealers of this
product. If they can't supply original
replacement part(s), contact Williams
Furnace at (909)825-0993.
TECHNICAL SERVICE
You may have further ques-
tions about installation, operation,
or troubleshooting. If so, contact
Williams Furnace at (909)825-0993.
6,000/15,000/25,000
Propane/LP Only
23 1/2 × 26 5/8 × 8
25 3/4 × 28 1/2 × 9 1/4
ACCESSORIES
Purchase these heater accessories from
your local dealer. If they can not sup-
ply these accessories, contact Williams
Furnace for information. You can also
write to the address listed on the front
dealer from
of this manual.
EQUIPMENT SHUTOFF VALVE
For all models. Equipment shutoff
valve with 1/8
2696541
Piezo
"
10 W.C.
"
14
"
11
30
35
"
NPT tap.
FAN KIT
16
Optional FAN Kit - 2295
The optional fan kit fits all models noted
in this manual. The fan has 3 settings
ON/OFF/Auto. The thermostatically
controlled fan improves heater ef-
ficiency and includes installation and
operating instructions.
FLOOR MOUNTING STAND
For locating heater on the floor
away from a wall. Complete installa-
tion instructions provided with floor
mounting stand.