Сrankshaft Alignment - PIAGGIO Carnaby 125 Service Station Manual

Engine
The connecting rod head bushings cannot be re-
placed. For the same reason, the connecting rod
may not be replaced and, when cleaning the
crankshaft, be very careful that no impurities get in
through the shaft's lubrication holes.
In order to prevent damaging the connecting rod
bushings, do not attempt cleaning the lubrication
duct with compressed air.
- Make sure that the 2 caps on the crankpin are
properly fitted.
- A wrong installation of a cap can seriously affect
the bushing lubrication pressure.
N.B.
THE MAIN BEARINGS ARE NOT GRINDABLE
Specific tooling
020074Y Support base for checking crankshaft
alignment
Characteristic
Off-line maximum admitted
A = 0.15 mm
B = 0.01 mm
C = 0.01 mm
D = 0.10 mm
Titolo
Crankshaft alignment
Measure the capacity of both axes X-Y
Name
Cat. 1
Cat. 2
ENG - 158
C
RANKSHAFT ALIGNMENT
Durata/Valore
STANDARD DIAMETER ( 125 - 200
Description Dimensions
28.998 ÷ 29.004
29.004 ÷ 29.010
Carnaby 125 - 200
Testo Breve (< 4000 car.)
³)
CM
Initials
Indirizzo Immagine
Quantity