Phone Settings; Advisory Tones; Ring Tones; Screen Saver - Gamma Yealink W52P Full User Manual

Phone Settings

Only the settings that can be changed will be described. The locked settings are not be included.

Advisory Tones

Advisory tones are acoustic signals of your handset, which inform you of different actions and states. The
following advisory tones can be configured independently of each other:

Keypad Tone: plays when a user presses any key of the keypad.

Confirmation: plays when a user saves settings or places the handset in the charger cradle.

Low Battery: plays when the capacity of the batteries is low and the handset requires charging.

Ring Tones

Ring tones are used to indicate incoming calls. You can set 9 different ring tones to distinguish the incoming
line on your handset. You can also set a ring tone for an incoming intercom call. When receiving an
incoming call, the handset rings the specified ring tone. Also you can set the ringtone volume.

Screen Saver

The screen saver of the handset is designed to protect your LCD screen by filling it with an analogue clock.
You can enable the screen saver to protect the LCD screen if you do not use your handset for a long time.
When the screen saver is enabled, an analogue clock will be activated and appear on the LCD screen if
the handset is idle for approximately 10 seconds.

Colour Schemes

You can change the background of your handset by changing the colour theme. There are 2 colour themes
available.

Display Backlight

Handset backlight status in the charging state or out of the charging state can be configured independently
of each other. If enabled, the backlight is always on. Otherwise, the backlight is turned off after the handset
is idle for a period of time. But the backlight is automatically turned on when an incoming call arrives, a key
is pressed or the status of handset changes. You can disable the backlight to save power.

Keypad Light

You can enable the keypad light to make the keypad light up when any key is pressed. This helps you
distinguish keys from each other in a dark environment.

Notification Light

Notification light is used to indicate voice mails and missed calls. When the handset receives a voice mail
or misses a call, the message key LED flashes red. You can configure the notification light to indicate the
voice mails or missed calls respectively.
© Gamma 2014. All rights reserved. Confidential.