Supported Call Features; Hold/Resume; Call Mute; Redial A Call - Gamma Yealink W52P Full User Manual

Supported Call Features

Hold/Resume

You can place an active call on hold. At any time, at most one active call can be in progress on your
handset. You can answer or make another call while placing the original call on hold.

To put a call on Hold press Options soft key and then select Hold.

To resume the call press the Resume soft key.
If 2 calls are on hold at the same time you can use the Up/Down arrow or the Swap soft key to swap
between the two calls

Call Mute

While you are on a call you can mute your microphone so the other party will not be able to hear you.
To mute your microphone press the

Redial a call

The redial number list stores the twenty last dialled phone numbers. When the memory of the redial number
list is full, the handset will automatically erase the oldest dialled number when a new number is dialled.
To go to the redial list press the

Transfer a call

There are 3 different types of call transfer:
Blind Transfer
To perform a blind transfer during a call, select the Options soft key and then press Transfer. Or you can
press the key directly.
Enter the number or select the handset that you would like to transfer the call to, and then press Transfer
or the key.
Attended Transfer before Answer
To perform an attended transfer before the other party answers the phone, select the Options soft key and
then press Transfer. Or you can press the
Enter the number or select the handset that you would like to transfer the call to, and then press the
key to dial out.
© Gamma 2014. All rights reserved. Confidential.
key. To un-mute the microphone press again the same key.
key.
key directly.