Dect Repeater (Rt10); Useful Information; Single Repeater - Gamma Yealink W52P Full User Manual

DECT Repeater (RT10)

The Yealink Repeater (RT10) can be deployed to extend the range of the W52P IP DECT phone to cover
areas where reception was previously not available. All the usual handset functions are supported by the
base station in the extended radio range. The repeater, base station and cordless handset employ wireless
connection. In this section we will describe the process to register/de-register a repeater to a base station
and also some tips will be provided on how to deploy a repeater.

Useful information

Repeater has the same radio coverage (up to 300m in unobstructed outdoor areas and up to 50m inside
buildings) as the base station.
Repeater does not increase the quantity of call paths and it does share the call paths with the base station.
Adding a repeater is similar to adding a base station on the multi-cell system.

Single Repeater

In this case an extended coverage range (30m) is required. You can install a repeater within the base
station coverage area. The separation distance between the base station and repeater is 30m. The base
will hand over calls to the repeaters as the user moves from the base station coverage area into the
extended coverage area. If you want to extend the coverage range, you can extend the separation distance
between the base station and repeater.
© Gamma 2014. All rights reserved. Confidential.