Upgrade Handset Firmware - Gamma Yealink W52P Full User Manual

Upgrade handset firmware

When the handset registers to the base station, it will check if there is any new handset firmware. If the
handset is placed on the charger cradle and a new firmware is available then the handset will automatically
update. In case that the handset is not placed in the charger cradle then a message will be displayed on
the screen to inform you that there is a new firmware available. In order for the handset to start the
upgrading process you have to confirm by pressing the "Upgrade" soft key.
Note: To double check that your handset is using the latest firmware, go to the Main Menu  Settings 
Upgrade Firmware  Upgrade
On the Firmware releases section you can find the base station FW and the handset FW which corresponds
to each base station FW.
Please note, the batteries in the handset are not covered under manufactures warranty. These are standard
AAA batteries. In the unlikely event you encounter any issues with the handset holding charge, we
recommend you try alternate batteries.
© Gamma 2014. All rights reserved. Confidential.