Suunto t6 Quick Manual page 19

To install the Suunto Sports Instrument on Windows 98/2000/XP:
1. The drivers are located on your PC software installation CD-ROM. Insert the CD-
ROM into your computer.
2. Attach the Suunto Sports Instrument PC interface cable to your computer's USB
port. The Wizard activates automatically. Click Next.
3. Search for a suitable driver on your system and click Next. If you are using
Windows XP, select Install the software automatically in the Wizard and click
Next. If an Installation warning is displayed, click Continue anyway.
4. Browse for the driver folder on the installation CD-ROM and click Next.
5. Click Next to install the located driver.
6. Click Finish to end the first part of the installation.
To install the USB serial port:
This should follow automatically once the Suunto Sports Instrument installation is
complete and take a couple of seconds. For Windows 98 the installation will start
automatically. For Windows 2000 and XP, repeat steps 3- 6 to install the USB serial
port and click Finish to close the Wizard.
Do not interrupt the installation before both parts of the installation are finished.
Once the installation of the serial port is completed, check that it has been successful.
Select Start – Settings – Control panel – System – (Hardware) – Device Manager
and View – Devices by Connection. The device should have been installed as
Suunto USB Serial Port (COMx), attached to Suunto Sports Instrument.
EN
17