Show Parameters; Initialise (Init) Pinpad; Display Application Versions - First Data FD40 User Manual

10.1 Show parameters

All configuration parameters may be showed by the user but are not changeable. A list of the different
parameter groups available for review will be displayed.

10.2 Initialise (Init) PinPad

This function is used to initialise the internal EMV Kernels for maintenance reasons. This function will not
be needed in standard working mode

10.3 Display application versions

This function allows the user to review the current versions of the software loaded into the FD40 terminal.
Show parameter screen
Init PIN Pad complete screen
SW version screen