Connecting The Cable Modem - RCA DCM215 User Manual

Connecting the Cable Modem

NOTE: It is important to supply power to the modem at all times.
Keeping your modem plugged in will keep it connected to the
Internet. This means that it will always be ready when you are. To
disconnect just your computer from the Internet, use the ON/OFF
button to put the modem in stand-by mode.
Written installation instructions appear on the following page.
2b
AC Power
*NOTE: Use only the Thomson power supply that
accompanied this unit. Using other adapters may
damage the unit.
3
Ethernet
Thomson Power
AC Adapter*
1
Coaxial Cable
2a
Cable In
5