Lap/Shoulder Belt Untwisting Procedure; Adjustable Upper Shoulder Belt Anchorage - Jeep 2012 Grand Cherokee Owner's Manual

Hide thumbs Also See for 2012 Grand Cherokee:

Table of Contents

58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Lap/Shoulder Belt Untwisting Procedure

Use the following procedure to untwist a twisted lap/

shoulder belt.

1. Position the latch plate as close as possible to the

anchor point.

2. At about 6 to 12 in (15 to 30 cm) above the latch plate,

grasp and twist the belt webbing 180 degrees to create a

fold that begins immediately above the latch plate.

3. Slide the latch plate upward over the folded webbing.

The folded webbing must enter the slot at the top of the

latch plate.

4. Continue to slide the latch plate up until it clears the

folded webbing.

In the front seating positions, the shoulder belt can be

adjusted upward or downward to position the belt away

from your neck. Press the release button to release the

anchorage, and then move it up or down to the position

that fits you best.

Adjusting Upper Shoulder Belt

As a guide, if you are shorter than average, you will

prefer a lower position, and if you are taller than average,

you will prefer a higher position. When you release the

Table of Contents