Shifting Procedures - Jeep 2012 Grand Cherokee Owner's Manual

Hide thumbs Also See for 2012 Grand Cherokee:

Table of Contents

446 STARTING AND OPERATING

NOTE: Refer to "Selec-Terrain – If Equipped" in "Start-

ing and Operating" for further information on the vari-

ous positions and their intended usages.

This range disengages both the front and rear driveshafts

from the powertrain. It is to be used for flat towing

behind another vehicle. Refer to "Recreational Towing"

in "Starting and Operating" for further information.

This range is for low speed four-wheel drive. It locks the

front and rear driveshafts together and forces the front

and rear wheels to rotate at the same speed. It provides

additional traction and maximum pulling power for

loose, slippery road surfaces only. Do not exceed 25 mph

Refer to "Selec-Terrain

further information on the various positions and their

intended usages.

Shifting Procedures

4WD HI To 4WD LOW

With the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), the

ignition switch in the ON position or the engine running,

shift the transmission into NEUTRAL, and press the

"4WD LOW" button once on the transfer case switch. The

"4WD LOW" indicator light in the instrument cluster

will begin to flash and remain on solid when the shift is

– If Equipped" for

Table of Contents