D Battery Pack; Belt Clip - Icom IC-F3162DT Instruction Manual

D Battery pack

To attach the battery pack:
Slide the battery pack on the back of the transceiver in the direc-
tion of the arrow (q), then lock it with the battery release button.
• Slide the battery pack until the battery release button makes a
'click' sound.
To remove the battery pack:
Slide the battery release button in the direction of the arrow
(w) as shown below. The battery pack can be removed.
NEVER remove or attach the battery pack when the
transceiver is wet or soiled. This may result water or dust
getting into the transceiver/battery pack and may result in
the transceiver being damaged.
Battery pack
q
w
NOTE: Keep the battery pack terminals clean. It's a good
idea to clean the battery pack terminals once a week.
Battery release
button
D Belt clip
To attach the belt clip:
q Remove the battery pack if it is attached.
w Slide the belt clip in the direction of the arrow, until the
belt clip is locked and makes a 'click' sound.
To remove the belt clip:
q Remove the battery pack if it is attached.
w Pinch the clip (q), and slide the belt clip in the direction
of the arrow (w).
w
q
1
ACCESSORIES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
2