Table of Contents
Advertisement
6
PRODUCT SPECIFICATIONS
Models
Twenty-Four (24) ports 100/10Mbps Fast Ethernet Switch
(For 13 inches and 19 inches width)
Standards
10BASE-T IEEE 802.3
100BASE-TX IEEE 802.3u
Ports
Twenty-four (24) 100BASE-TX
Media Support
10BASE-T Category 3, 4 or 5 TP
100BASE-TX Category 5 TP
Bandwidth
100BASE-TX 200/100/20/10Mbps
Forwarding /
148,810 packets/second per port @ 100Mbps, max.
Filtering Rate
14,881 packets/second per port @ 10Mbps, max.
Latency
9 sec @100Mbps, minimum
70 sec @ 10Mbps, minimum
MAC Addresses
8K six (6)-bytes entries maximum, self-learning
Buffer Memory
2.5Mb
Duplex Modes
Auto-Negotiation
Crossover
All the TP ports support Auto-MDIX function
LED Indicators
One (1) for Power
One (1) per port for Link / ACT
One (1) per port for Full-Duplex /Collision
Power Supply
Full range Auto-Switching
Input voltage: 100 ~ 240 +/-10% VAC/ 50 ~ 60 Hz
Power Consumption 21.5 watt max
Environment
Operating Temp: 0 ~ 45 C (32 ~ 113 F)
Storage Temp: -20 ~ 70 C (-4 ~ 158 F)
Humidity: 10% ~ 90% non-condensing
Certifications
FCC Class A
CE Mark
Dimensions
For 19 inches width:
442x184x44mm(17.40x7.24x1.73inches)
This equipment has been tested and found to comply with the limits for a Class A computing device pursuant to
Part 15 of FCC Rules, which are designed to provide reasonable protection against electromagnetic interference
in a commercial environment.
Changes or modifications to the equipment not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This is a Class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
FCC WARNING
CE MARK WARNING
8
Advertisement
Table of Contents
