Product Specifications - Lindy 25020 User Manual

6

PRODUCT SPECIFICATIONS

Models 16-Port Switch
Standards
IEEE 802.3u: 100BASE-TX
!
IEEE 802.3: 10BASE-T
!
Ports
Sixteen (16) 100BASE-TX/10BASE-T
!
Media Support
100BASE-TX: Category 5 TP
!
10BASE-T: Category 3, 4 or 5 TP
!
Bandwidth
100BASE-TX: 200/100Mbps via Auto-Negotiation
!
10BASE-T: 20/10Mbps via Auto-Negotiation
!
Forwarding/
148810 packets/second per port @ 100Mbps, maximum
!
Filtering Rate 14881 packets/second per port @ 10Mbps, maximum
!
Latency
8.5 sec @100Mbps, minimum
!
67 sec @ 10Mbps, minimum
!
MAC Addresses
8K Six (6)-byte entries maximum, Self-Learning
!
Buffer Memory 4M bits
!
Duplex Modes
Auto-Negotiation
!
Auto-MDIX
All TP ports support Auto-MDI/MDIX function
!
DIP Switches
Two (2) for Home VLAN setting
!
Four (4) for TRUNK setting
!
LED Indicators
One (1) for Power
!
One (1) per port for Link/ACT
!
One (1) per port for Full-Duplex or Collision
!
Two (2) for Home VLAN status
!
Four (4) for TRUNK Group status
!
Power Supply
Internal full range switching power supply
!
Input voltage: 100 ~ 240V AC +/-10%, 50/60 Hz
!
Power 9.9W maximum
!
Consumption
Environment
Operating Temperature: 0 ~ 45 C (32 ~ 113 F)
!
Storage Temperature: -20 ~ 70 C (-4 ~ 158 F)
!
Humidity: 10% ~ 90% Non-Condensing
!
Certifications FCC Class A, CE Mark and TUV approved
!
Dimensions
250 x 150 x 43 mm (9.8 x 5.9 x 1.7 inches)
!
This equipment has been tested and found to comply with the limits for a Class A computing device pursuant to
Part 15 of FCC Rules, which are designed to provide reasonable protection against electromagnetic interference
in a commercial environment.
Changes or modifications to the equipment not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This is a Class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
Other model not available
!
!
!
!
!
!
!
FCC WARNING
CE MARK WARNING
10