Connecting To The Mobile App - TomTom Bandit Quick Start Manual

Connecting to the Mobile app

The Mobile app will not start until you have connected your smartphone to your TomTom Bandit
using Wi-Fi.
Tip: For iOS only. If your smartphone is Bluetooth Smart (BLE) capable, Wi-Fi is switched on and
off automatically by the
Follow these steps to connect your TomTom Bandit to your smartphone, and start the Mobile app:
1. Switch on your TomTom Bandit.
2. From the Camera Status screen, move up to turn on the TomTom Bandit's Wi-Fi connection.
The name of the Wi-Fi connection and the password are shown on the screen.
3. On your smartphone, go to the phone's Wi-Fi settings screen then select the TomTom Bandit
Wi-Fi connection from the network list.
4. Enter the password shown on the TomTom Bandit screen.
Your phone connects to the TomTom Bandit. On the TomTom Bandit, the screen shows Con-
nected to device.
5. Start the Mobile app.
The Mobile app starts and shows the Viewfinder screen.
Mobile app. Wi-Fi is also switched off when it isn't used for a while.
65