TomTom Bandit Quick Start Manual page 34

1. Before you install a mount, find the best position for your TomTom Bandit.
Attach the mount only to a smooth and hard surface. The mount won't securely attach to
porous, textured or soft surfaces.
To install the TomTom Bandit at different angles and on the left or right side of a helmet, you
can turn the TomTom Bandit's base more than 180 degrees around the TomTom Bandit body.
Tip: Use the Mobile app
2. Clean the area where you want to install the mount.
Wax, oil, dirt and moisture reduce adhesion, which can result in a weak bond. Make sure that
the area is completely dry.
3. In dry, room-temperature conditions, attach the mount base. Push the mount base firmly down
on to the surface.
The mount base won't securely attach if you install it in damp and cold conditions.
4. Wait 24 hours for the adhesive to cure.
live viewfinder to set the TomTom Bandit to the correct view.
34