TomTom Bandit Quick Start Manual page 52

Remote
The remote control can be used to start and stop recording, and to
video. Use the remote control when you can't easily or safely reach your TomTom Bandit.
You can hold the remote control in your hand, or you can attach it to a place you can easily reach.
Note: The remote uses Bluetooth Smart to connect to your TomTom Bandit, and can only be used
with one TomTom Bandit at a time.
Connecting the remote control
1. From the Camera Status screen on your TomTom Bandit, move down to open the SETTINGS
menu.
2. Select GENERAL, then move right.
3. Select CONNECT, then move right.
4. Select REMOTE, then move right.
5. Move up or down to turn it on.
6. On the remote control, press the START button for 3 seconds until the LED flashes green.
The remote control is connected to the TomTom Bandit.
Tip: You can also use the
Sensors
You can connect and then turn on and off an external sensor, for example a heart rate monitor.
You can check if a heart rate monitor or other sensor is working without having to start an activity.
See Testing a heart rate sensor lower down in this topic.
Connecting a sensor and switching it on
1. From the Camera Status screen on your TomTom Bandit, move down to open the SETTINGS
menu.
2. Select GENERAL, then move right.
3. Select CONNECT, then move right.
4. Select SENSORS, then move right.
5. Select HEART, then move right, followed by moving up or down to turn it ON.
Switching a sensor off
Follow the same steps as shown above but select OFF for step 5.
Mobile app live viewfinder as a remote control.
manually add highlights
52
to your