About Quickgpsfix; General Settings - TomTom Bandit Quick Start Manual

Hide thumbs Also See for Bandit:
Table of Contents

Advertisement

3. On your smartphone, go to the phone's Wi-Fi settings screen then select the TomTom Bandit
Wi-Fi connection from the network list.
4. Enter the password shown on the TomTom Bandit screen.
Your phone connects to the TomTom Bandit. On the TomTom Bandit, the screen shows Con-
nected to device.
5. Start the
Mobile
app.
The Mobile app starts and shows the Viewfinder screen.

About QuickGPSFix

In the following situations, your TomTom Bandit uses QuickGPSFix to help find your position:
The TomTom Bandit isn't used for a long time.
The TomTom Bandit is out of coverage for more than one week.
The TomTom Bandit is restarted more than 500 km away from your previous position.
QuickGPSfix contains information about satellite positions which helps your TomTom Bandit find
your position faster.
Tip: QuickGPSFix information is stored in a separate folder from your videos and photos.

General settings

These settings determine the overall behaviour of your TomTom Bandit.
Connect
Important: You can also change settings using the
From the Camera Status screen on your TomTom Bandit, move right then move down to open the
SETTINGS menu. Select GENERAL then select CONNECT.
Use these settings to connect your TomTom Bandit to your smartphone, a remote control or an
external sensor.
Phone - Settings - Camera
The Mobile app will not start until you have connected your smartphone to your TomTom Bandit
using Wi-Fi.
Tip: For iOS only. If your smartphone is Bluetooth Smart (BLE) capable, Wi-Fi is switched on and
off automatically by the
Follow these steps to connect your TomTom Bandit to your smartphone, and start the Mobile app:
1. Switch on your TomTom Bandit.
2. From the Camera Status screen, move up to turn on the TomTom Bandit's Wi-Fi connection.
The name of the Wi-Fi connection and the password are shown on the screen.
3. On your smartphone, go to the phone's Wi-Fi settings screen then select the TomTom Bandit
Wi-Fi connection from the network list.
4. Enter the password shown on the TomTom Bandit screen.
Your phone connects to the TomTom Bandit. On the TomTom Bandit, the screen shows Con-
nected to device.
5. Start the
Mobile
app.
The Mobile app starts and shows the Viewfinder screen.
Mobile
app. Wi-Fi is also switched off when it isn't used for a while.
Mobile App
on your smartphone.
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents