TO MATCH LIGHT THE OPTIONAL SEAR BURNER:
If you are unable to light Sear Burner using the "TURN AND CLICK" you can utilize a long match to
match light the sear burner. Fit the match between the wire loops.
Position the lit LONG match down between the cooking grill rack approximately 1/4" above the burner. Turn the
Valve to the lite/hi position to release gas to the burner. If burner does not light within 5 seconds, turn off burner,
wait 5 minutes and try again. If you are unable to light the burner within three attempts call a service representa-
tive.
NOTE: While holding match holder stick be careful not to hold hand over burner area as this may
cause serious burns or other personal injury.
12