Sony HCD-GT111 Service Manual page 18

HCD-GT111/GT222/GT444/GT555
Display of
Total Error
FF button
Display of
AMS (+)
Mechanical
button
FF button
Display of
AMS (+)
No Disc
button
4. To clear the error record, operate the cold reset. (Refer to the
"COLD RESET")
5. To release from this mode, press the [
the power plug to turn off the system.
• Display of total error
EM**ED**
EM** : The number of mechanical errors.
ED** : The number of no disc errors after chucking the disc.
• Display of mechanical errors
M*$$%%&&##00
M* : The number of mechanical error ("0" is latest one)
(Press [>] button to display the next error)
$$ : Not used
%% : Loading related error (Second fi gure is not used)
D : Stop by the problem other than mechanical problem
while closing.
E : Stop by the problem other than mechanical problem
while opening.
C : Stop by the problem other than mechanical problem
while chucking up.
F : Stop by the problem other than mechanical problem
while chucking down.
&& : Emerging error
01 : Stop while chucking up.
02 : Stop while chucking down.
03 : Time-out of EX-CHANGE open.
05 : Time-out of EX-CHANGE close.
## : Not used
18
FR button
AMS (–)
button
Errors
FR button
AMS (–)
button
Errors
] button or disconnect
?/1
• Display of no disc errore
D*$$%%&&##00
D* : The number of no disc error ("0" is latest one)
(Press [>] button to display next error)
$$ : Error type
01 : Focus error
02 : GFS error
03 : Setup error
%% : Not used
&& :
00 : No disc judgment without chucking retry.
01 : No disc judgment after chucking retry.
## : The state when judged as no disc
01 : Stop
02 : Setup
03 : TOC reading
04 : Access
05 : Playback
06 : Pause
07 : Manual search (Play)
08 : Manual search (Pause)
CD REPEATS 5 LIMIT OFF MODE
The number of repeat for CD playback is 5 times when the repeat
mode is "REPEAT ALL". This mode enables CD to repeat play-
back for limitless times.
Procedure:
1. Press [ ] button to turn on the system.
?/1
2. Select CD function.
3. Press [x] button, [CD] button and [DISC 1] button simultane-
ously to enter the CD repeat 5 limit off mode and the fl uores-
cent indicator tube displays "LIMIT OFF".
4. To release from this mode, operate the cold reset. (Refer to the
"COLD RESET")
CD SHIP MODE (WITH MEMORY CLEAR)
This mode moves the optical pick-up to the position durable to
vibration and clears all data including preset data stored in the EE-
PROM to initial conditions during the next AC-In. Use this mode
when returning the set to the customer after repair.
Procedure:
1. Press [ ] button to turn on the system.
?/1
2. Select CD function.
3. Press [x] button, [DISC 1] button and [
ously. The system turns off automatically.
4. After the "STANDBY" blinking display fi nishes, a message
"MECHA LOCK" is displayed on the fl uorescent indicator
tube and the CD ship mode is set.
CD SHIP MODE (WITHOUT MEMORY CLEAR)
This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
Procedure:
1. Press [ ] button to turn on the system.
?/1
2. Select CD function.
3. Press [DISC SKIP/EX-CHANGE] button and [
multaneously. The system turns off automatically.
4. After the "STANDBY" blinking display fi nishes, a message
"MECHA LOCK" is displayed on the fl uorescent indicator
tube and the CD ship mode is set.
] button simultane-
?/1
] button si-
?/1