Sony HCD-GTX88 Service Manual

Sony HCD-GTX88 Service Manual

Cd deck receiver
Table of Contents

Advertisement

SERVICE MANUAL
Ver. 1.0 2007. 06
• HCD-GTX88 is the tuner, deck,
CD and amplifier section in
MHC-GTX88.
Amplifier section
Brazil model only
The following are measured at
AC 127 V or 220 V, 50/60 Hz
Front/Surround speaker
RMS output power:
205 W + 205 W
(at 8 Ω, 1 kHz, 10% THD)
Subwoofer
RMS output power:
130 W + 130 W
(at 6 Ω, 100 Hz, 10% THD)
Other models
The following are measured at
Mexican model:
AC 127 V, 60 Hz
Other models:
AC 120, 220, 240 V, 50/60 Hz
Front/Surround speaker
Power Output (rated):
175 W + 175 W
(at 8 Ω, 1 kHz, 1% THD)
RMS output power (reference):
255 W + 255 W
(per channel at 8 Ω, 1 kHz,
10% THD)
Subwoofer
RMS output power (reference):
130 W + 130 W
(at 6 Ω, 100 Hz, 10% THD)
Sony Corporation
9-887-753-01
2007F04-1
Personal Audio Division
© 2007. 06
Published by Sony Techno Create Corporation
HCD-GTX88
Model Name Using Similar Mechanism
CD
CD Mechanism Type
Section
Optical Pick-up Name
Tape Deck
Model Name Using Similar Machanism
Section
SPECIFICATIONS
Inputs
VIDEO (AUDIO IN) L/R:
AUDIO (AUDIO IN) L/R:
MIC:
(USB) port:
Outputs
PHONES:
Disc player section
System
Laser
Laser Output
E Model
Australian Model
NEW
CDM74KF-K6BD91UR-WOD//M
KSM-213DCP/C2NP
HCD-GN1100D
Voltage 250 mV,
impedance 47 kilohms
Voltage 450 mV,
impedance 47 kilohms
Sensitivity 1 mV,
impedance 10 kilohms
Type A
accepts headphones of
8 ohms or more
Compact disc and digital
audio system
Semiconductor laser
(λ=770 – 810 nm)
Emission duration:
continuous
Max. 44.6 µW*
* This output is the value measured
at a distance of 200 mm from the
objective lens surface on the Optical
Pick-up Block with 7 mm aperture.
– Continued on next page –
CD DECK RECEIVER
1

Advertisement

Table of Contents
loading

Summary of Contents for Sony HCD-GTX88

  • Page 1 HCD-GTX88 SERVICE MANUAL E Model Australian Model Ver. 1.0 2007. 06 • HCD-GTX88 is the tuner, deck, CD and amplifier section in MHC-GTX88. Model Name Using Similar Mechanism CD Mechanism Type CDM74KF-K6BD91UR-WOD//M Section Optical Pick-up Name KSM-213DCP/C2NP Tape Deck Model Name Using Similar Machanism...
  • Page 2 COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
  • Page 3 HCD-GTX88 Notes on Chip Component Replacement NOTES ON LASER DIODE EMISSION CHECK • Never reuse a disconnected chip component. The laser beam on this model is concentrated so as to be focused on • Notice that the minus side of a tantalum capacitor may be the disc reflective surface by the objective lens in the optical pick- damaged by heat.
  • Page 4 HCD-GTX88 MODEL IDENTIFICATION • Abbreviation : 120V AC area in E model – MODEL NUMBER LABEL – E51 : Chilean and Peruvian model : Argentina model AUS : Australian model PART No. MODEL PARTS No. GTX88: E2 3-113-126-0s GTX88: E51...
  • Page 5: Table Of Contents

    HCD-GTX88 TABLE OF CONTENTS 1. GENERAL 6-7. Circuit Boards Location ............ 37 6-8. Printed Wiring Board — BD91 Section — ....... 40 Guide to parts and controls ............6 6-9. Schematic Diagram — BD91 Section — ......41 6-10. Printed Wiring Boards — Driver Section — ..... 42 2.
  • Page 6: General

    HCD-GTX88 SECTION 1 GENERAL This section is extracted from instruction manual. Guide to parts and controls This manual mainly explains operations using the buttons on the unit, but the same operations can also be performed using the buttons on the remote having the same or similar names.
  • Page 7 HCD-GTX88 1 FLANGER (pages 35, 43, 48) +/– (pages 17, 20, 23, 25, 27, DELAY (pages 35, 43, 48) Press to select a folder. CHORUS (pages 36, 43, 48) SOUND FLASH (page 35) m/M (rewind/fast forward) Press to create a party atmosphere.
  • Page 8 HCD-GTX88 N REC/ERASE (indicator) X EQ BAND/MEMORY (page 33) (pages 23, 25) Press to select a frequency band when adjusting the graphic Lights up when recording from a disc equalizer. onto the connected optional USB device (Digital music player or USB Y DISPLAY (pages 38, 39, 40) storage media).
  • Page 9 HCD-GTX88 – Display AUTO PRESET MONO TUNED PLAY SLEEP FLANGER CHORUS DELAY SHUF TAPE USB SYNC MATRIX SUR 12 REP 1 LINK ALL 1 DISC S MP3 BOOSTER Z GROOVE USB MEMORY A Lights up when the USB function is K Indicators for the TAPE function selected (page 24).
  • Page 10 HCD-GTX88 Subwoofer A (SS-WG88A) 1 "/1 (on/standby) (pages 13, 16, Press to turn the system on or off. B CLOCK/TIMER SELECT (page 38) CLOCK/TIMER SET (pages 16, Press to set the clock and the timers. C REPEAT/FM MODE (pages 21,...
  • Page 11 HCD-GTX88 E ./> (go forward/go J EQ (page 33) backward) (pages 17, 20, 23, 25, Press to select a preset sound effect. 27, 31, 37, 48) K CLEAR (pages 21, 27) Press to select a track. Press to delete a pre-programmed track.
  • Page 12: Disassembly

    HCD-GTX88 SECTION 2 DISASSEMBLY Note : Disassemble the unit in the order as shown below. 2-1. CASE (TOP) (Page 13) 2-2. LOADING PANEL (Page 13) 2-9. COVER (CDM) (Page 17) 2-3. TUNER PACK (Page 14) 2-16. DRIVER BOARD, 2-15. BD91 BOARD 2-4.
  • Page 13: Case (Top)

    HCD-GTX88 Note : Follow the disassembly procedure in the numerical order given. 2-1. CASE (TOP) 8 two screws (+BVTP 3 × 10) qa two screws (+BVTP 3 × 10) 0 panel (side-L) 7 two screws (case 3 TP2) qd case (top)
  • Page 14: Tuner Pack

    HCD-GTX88 2-3. TUNER PACK 2 wire (flat type) (9 core) (CN1) 3 tuner pack 1 two screws (+BVTP 3 × 8) 2-4. CD BLOCK SECTION qs CD block section 6 wire (flat type) (13 core) (CN701) 9 wire (flat type) (21 core)
  • Page 15: Front Panel Section

    HCD-GTX88 2-5. FRONT PANEL SECTION 5 wire (flat type) (11 core) 6 CN100 (4P) (CN509) 4 wire (flat type) (17 core) (CN508) 0 front panel section 9 CN903 (3P) 7 CN503 (3P) 8 CN507 (8P) 2 three screws 1 three screws (+BVTP 3 ×...
  • Page 16: Panel Board, Function Board, Jog Board

    HCD-GTX88 2-7. PANEL BOARD, FUNCTION BOARD, JOG BOARD 2 two screws (+BVTP 2.6 (3CR)) 8 five screws 4 PANEL board 3 two screws (+BVTP 2.6 (3CR)) (+BVTP 2.6 (3CR)) 1 CN956 (2P) 6 CN905 (2P) 9 four screws (+BVTP 2.6 (3CR))
  • Page 17: Cover (Cdm)

    HCD-GTX88 2-9. COVER (CDM) CD mechanism deck 3 cover (CDM) 2 screw (+BVTP 3 × 10) 1 two screws (+BVTP 3 × 10) 2-10. BACK PANEL SECTION 3 CN1202 (2P) 4 wire (flat type) (17 core) (CN1502) 2 CN1204 (4P) 6 two screws (+BVTP 3 ×...
  • Page 18: Power Board Section

    HCD-GTX88 2-11. POWER BOARD SECTION 7 two screws (+BV3 (3-CR)) qa POWER board section 8 screw (+BV3 (3-CR)) 1 CN581 (3P) 9 screw (+BV3 (3-CR)) 3 DC fan(M892) 0 two screws (+BVTP 3 × 10) 2 two screws (+BV3 (3-CR)) 6 three screws (+BVTP 3 ×...
  • Page 19: Subwoofer Board, Power Board

    HCD-GTX88 2-13. SUBWOOFER BOARD, POWER BOARD 3 screw (+BV3 (3-CR)) 4 SUBWOOFER board 2 two screws (+BVTP 3 × 10) qs heat sink assy 1 two screws (transistor) 6 two screws (+BVTP 3 × 8) qf bracket qd screw (+BVTP 3 × 10)
  • Page 20: Bd91 Board

    HCD-GTX88 2-15. BD91 BOARD 3 BD91 board 1 wire (flat type) (16 core) 2 Remove the four solders. (CN301) 2-16. DRIVER BOARD, SW BOARD, USB BOARD 1 two screws (+BVTT (M2.6)) 2 CN703 (4P) 5 DRIVER board 6 screw (+BVTT (M2.6))
  • Page 21: Optical Pick-Up

    HCD-GTX88 2-17. OPTICAL PICK-UP 7 optical pick-up (BU-K6BD91UR) 4 two insulators 6 two insulators 3 two coil springs (insulator) 5 two coil springs (insulator) 1 two floating screws (+PTPWH M2.6) 2 two floating screws (+PTPWH M2.6) 2-18. SENSOR BOARD 1 floating screw (+PTPWH M2.6)
  • Page 22: Motor (Tb) Board

    HCD-GTX88 2-19. MOTOR (TB) BOARD 2 stopper table 1 stopper 7 t able motor assy (M741) 3 wire (flat type) (5 core) (CN742) 8 MOTOR (TB) board 6 Remove the two solderings of motor. 5 two screws (+BTTP (M2.6)) 2-20. MOTOR (LD) BOARD 3 two screws (+BTTP (M2.6))
  • Page 23: Test Mode

    HCD-GTX88 SECTION 3 TEST MODE 4. When the [MASTER VOLUME] knob is turned clockwise even [GC TEST MODE] slightly, the sound volume increases to its maximum and a • This mode is used to check the fluorescent indicator tube, LEDs, message “VOLUME MAX”...
  • Page 24 HCD-GTX88 [CD SERVICE MODE] • Aging mode sequence: • This mode let you move the CD sled motor freely. Use this mode when you want to clean the optical pick-up. START Procedure: 1. Press ?/1 button to turn on the system.
  • Page 25 HCD-GTX88 [CD ERROR CODE MODE] : The process when trouble occurs : Process ejecting DISC • Display the CD error code when an error occurred. : Process waiting for inserting DISC Procedure: : Process sending request to insert a disc to upper 1.
  • Page 26 HCD-GTX88 [CD REPEAT 5 LIMIT OFF MODE] Procedure: 1. Press ?/1 button to turn on the system. • The number of repeat for CD playback is 5 times when the re- 2. Select CD section. peat mode is “REPEAT ALL”. This mode enables CD to repeat 3.
  • Page 27: Mechanical Adjustments

    HCD-GTX88 SECTION 4 MECHANICAL ADJUSTMENTS [ERROR MESSAGE] Precaution 1. Clean the following parts with a denatured alcohol-moistened swab: 1. GC error message record/playback heads pinch rollers erase head rubber belts • Display capstan idlers 2. Demagnetize the record/playback head with a head Display on fluorescent indicator tube, demagnetizer.
  • Page 28: Electrical Adjustments

    HCD-GTX88 SECTION 5 ELECTRICAL ADJUSTMENTS 0 dB = 1 µV 0 dB = 0.775 V TUNER SECTION DECK SECTION [FM Tune Level Check] 1. Demagnetize the record/playback head with a head demagnetizer. FM signal generator 2. Do not use a magnetized screwdriver for the adjustments.
  • Page 29 HCD-GTX88 3. Mode: Playback CD SECTION test tape [TEST DISC LIST] P-4-A100 oscilloscope (10 kHz, –10 dB) Use the following test disc on test mode. pin 1 L-CH • CD: YEDS-18 (PART No. 3-702-101-01) pin 2 MAIN PATD-012 (PART No. 4-225-203-01)
  • Page 30 HCD-GTX88 [RF LEVEL CHECK] oscilloscope BD91 board TP123(RFO) TP124(VC) – Procedure : 1. Connect an oscilloscope to TP123 (RFO) and TP124 (VC). 2. Turn the power on. 3. Load a disc (YEDS-18) and playback. 4. Confirm that oscilloscope waveform is clear and check if RF signal level is correct or not.
  • Page 31: Diagrams

    HCD-GTX88 SECTION 6 DIAGRAMS 6-1. BLOCK DIAGRAM — RF/SERVO SECTION — CD+1.5V REG CD+1.5V DVDD+3.3V IC201 FNI1 CD LCH MAIN FPI1 SECTION CD RCH (Page 33) FNI2 DETECTOR FPI2 • Signal Path DATA AOUT2(PO5) BCK(PO8) : CD PLAY GATE PIO3...
  • Page 32: Block Diagram - Tape/Tuner Section

    HCD-GTX88 6-2. BLOCK DIAGRAM — TAPE/TUNER SECTION — DECK-A AIN1 L – CH EQ OUT1 PB OUT1 TAI1 MAIN TC-PB-L HEAD SECTION R – CH R-CH (Page 33) CN510 BIN1 TC PB MUTE CONTROL SWITCH TEST Q382.383 Q376 DECK-B CONNECTOR R-CH L –...
  • Page 33: Block Diagram - Main Section

    HCD-GTX88 6-3. BLOCK DIAGRAM — MAIN SECTION — INPUT SELECT SWITCH, GRAPHIC EQUALIZER CONTROL, ELECTRICAL VOLUME EXCEPT AUS MODEL IC101 RV1150 J103 SAOUT MIC AMP MIC AMP D-LIGHT IC1100 IC1100 D101,102 LEVEL J1100 SYNC OUT D+4V REG (1/2) (2/2) A+9V...
  • Page 34: Block Diagram - Usb Section

    HCD-GTX88 6-4. BLOCK DIAGRAM — USB SECTION — USB CONTROL S-RAM IC901 IC921 VBUS POWER ON/OFF SWITCH VBUS+5V I/O0 IC915 I/O3 • I/O4 P00/D0 I/O7 P07/D7 P75/USBOC • • EN 1 P76/USBPON P10/D8 I/O8 I/O11 P17/D15 • VBUS • Signal Path...
  • Page 35: Block Diagram - Amp/Subwoofer Section

    HCD-GTX88 6-5. BLOCK DIAGRAM — AMP/SUBWOOFER SECTION — MAIN DBFB F/B SECTION J1101 (Page 33) PHONES POWER AMP IC601 D624 RY646 MAIN SECTION (Page 33) TM600 FRONT SPEAKER OVER LOAD MUTE DETECT Q640, 641 Q668, 618 RELAY DRIVE MUTING RY665...
  • Page 36: Block Diagram - Display/Power Section

    HCD-GTX88 6-6. BLOCK DIAGRAM — DISPLAY/POWER SECTION — LED+9V 83 XI KEY2 X900 S901 – 914, 4MHz 916 –933 82 XO KEY0 Q903 Q902 P1 – 36 Q900 LED SELECTOR Q901 ND900 G1,22,23 BUFFER G1,22,23 VACUUM Q917, 918, 919 FLUORESCENT...
  • Page 37: Circuit Boards Location

    HCD-GTX88 6-7. CIRCUIT BOARDS LOCATION SENSOR board BD91 board SW board MOTOR (TB) board MOTOR (LD) board USB board DRIVER board PANEL board FUNCTION board JOG board USB CONNECTOR board MAIN board MIC board PRIMARY board TUNER PACK SWITCHING POWER...
  • Page 38 HCD-GTX88 • Note For Printed Wiring Boards And Schematic Diagrams Note on Printed Wiring Board: Note on Schematic Diagram: • X : parts extracted from the component side. • All capacitors are in µF unless otherwise noted. (p: pF) • Y : parts extracted from the conductor side.
  • Page 39 HCD-GTX88 • Waveforms — BD91 BOARD — (CD PLAY) — MAIN BOARD — IC101 5 (FEI) IC401 q; (XC-IN) Approx. 1 Vp-p 200 mVp-p 32.768 kHz 100 mV/DIV, 5 msec/DIV 0.5 V/DIV, 0.1 µ sec/DIV IC101 6 (TEI) IC401 qg (X IN) Approx.
  • Page 40: Printed Wiring Board - Bd91 Section

    HCD-GTX88 6-8. PRINTED WIRING BOARD — BD91 SECTION — • Refer to page 37 for Circuit Boards Location. : Uses unleaded solder. M401 (SPINDLE) S201 (LIMIT) C403 C404 R402 M402 (SLED) IC401 C122 R140 C123 R143 R118 R128 C138 C153...
  • Page 41: Schematic Diagram - Bd91 Section

    HCD-GTX88 • Refer to page 39 for Waveforms. • Refer to page 64 IC Block Diagrams. 6-9. SCHEMATIC DIAGRAM — BD91 SECTION — • Refer to page 70 for IC Pin Description of IC101. C107 C136 C112 R108 R129 R139...
  • Page 42: Printed Wiring Boards - Driver Section

    HCD-GTX88 6-10. PRINTED WIRING BOARDS — DRIVER SECTION — • Refer to page 37 for Circuit Boards Location. : Uses unleaded solder. MAIN BOARD CN511 (Page 48) (DISC TRAY ADDRESS DETECT) S751 CN751 (OPEN/CLOSE DETECT) HCD-GTX88...
  • Page 43: Schematic Diagram - Driver Section

    HCD-GTX88 6-11. SCHEMATIC DIAGRAM — DRIVER SECTION — • Refer to page 64 for IC Block Diagrams. IC B/D IC701 R702 R701 D701 C715 CN704 C751 CN721 M751 IC B/D IC712 R712 R713 CN701 CN705 C752 CN751 S751 D711 R711...
  • Page 44: Schematic Diagram - Main Section (1/4)

    HCD-GTX88 • Refer to page 39 for Waveforms. • Refer to page 64 IC Block Diagrams. 6-12. SCHEMATIC DIAGRAM — MAIN SECTION (1/4) — • Refer to page 72 for IC Pin Description of IC401. Q560,561 CD POWER CONTROL SWITCH...
  • Page 45: Schematic Diagram - Main Section (2/4)

    HCD-GTX88 6-13. SCHEMATIC DIAGRAM — MAIN SECTION (2/4) — • Refer to page 64 for IC Block Diagrams. (Page 41) (Page 53) (Page 51) USB BOARD BD91 BOARD EFFECTOR BOARD CN907 CN202 CN1502 MAIN BOARD (2/4) C520 C536 R252 R256...
  • Page 46: Schematic Diagram - Main Section (3/4)

    HCD-GTX88 6-14. SCHEMATIC DIAGRAM — MAIN SECTION (3/4) — • Refer to page 67 for IC Block Diagrams. (Page 45) (Page 44) MAIN BOARD (1/4) MAIN BOARD (2/4) MAIN BOARD (3/4) CN510 HP901 TEST PB HEAD (DECK A) CN503 C314...
  • Page 47: Schematic Diagram - Main Section (4/4)

    HCD-GTX88 6-15. SCHEMATIC DIAGRAM — MAIN SECTION (4/4) — • Refer to page 67 for IC Block Diagrams. (Page 44) (Page 45) MAIN BOARD (1/4) MAIN BOARD (2/4) MAIN BOARD ( 4 / 4 ) Q607 CN513 MUTE DC DETECT...
  • Page 48: Printed Wiring Board - Main Section

    HCD-GTX88 6-16. PRINTED WIRING BOARD — MAIN SECTION — • Refer to page 37 for Circuit Boards Location. : Uses unleaded solder. (Page 52) (Page 42) EFFECTOR (Page 50) (Page 56) (Page 40) DRIVER BOARD CN701 BOARD TU901 CN1502 FM/AM...
  • Page 49: Printed Wiring Board - Usb Connector Section

    HCD-GTX88 6-17. PRINTED WIRING BOARD — USB CONNECTOR SECTION — 6-18. SCHEMATIC DIAGRAM — USB CONNECTOR SECTION — • Refer to page 37 for Circuit Boards Location. : Uses unleaded solder. CN952 USB CONNECTOR BOARD NO958 (USB) PANEL D955 SEL A...
  • Page 50: Printed Wiring Board - Usb Section

    HCD-GTX88 6-19. PRINTED WIRING BOARD — USB SECTION — • Refer to page 37 for Circuit Boards Location. : Uses unleaded solder. C902 C903 C904 CN904 R928 R921 IC915 C901 C914 R945 R938 R983 RB921 C916 R937 R933 C907 RB922...
  • Page 51: Schematic Diagram - Usb Section

    HCD-GTX88 • Refer to page 39 for Waveforms. • Refer to page 68 IC Block Diagrams. 6-20. SCHEMATIC DIAGRAM — USB SECTION — • Refer to page 75 for IC Pin Description of IC901. CN901 TP914 TP913 (Page 47) C916...
  • Page 52: Printed Wiring Board - Effector Section

    HCD-GTX88 6-21. PRINTED WIRING BOARD — EFFECTOR SECTION — • Refer to page 37 for Circuit Boards Location. : Uses unleaded solder. MAIN BOARD CN512 (Page 48) • Semiconductor Location Ref. No. Location D1502 IC1500 IC1501 IC1503 IC1505 Q1500 Q1502...
  • Page 53: Schematic Diagram - Effector Section

    HCD-GTX88 6-22. SCHEMATIC DIAGRAM — EFFECTOR SECTION — • Refer to page 68 for IC Block Diagrams. (Page 45) HCD-GTX88...
  • Page 54: Printed Wiring Board - Panel Section

    HCD-GTX88 6-23. PRINTED WIRING BOARD — PANEL SECTION — • Refer to page 37 for Circuit Boards Location. : Uses unleaded solder. PANEL BOARD JW966 JW965 JW967 Q920 JW939 JW968 IC901 JW948 JW947 JW946 ND900 JW944 C946 JW945 JW964 C931...
  • Page 55: Schematic Diagram - Panel Section

    HCD-GTX88 • Refer to page 39 for Waveforms. • Refer to page 69 IC Block Diagrams. 6-24. SCHEMATIC DIAGRAM — PANEL SECTION — • Refer to page 77 for IC Pin Description of IC900. PANEL BOARD ND900 VACUUM FLUORESCENT DISPLAY...
  • Page 56: Printed Wiring Boards - Function Section

    HCD-GTX88 6-25. PRINTED WIRING BOARDS — FUNCTION SECTION — • Refer to page 37 for Circuit Boards Location. : Uses unleaded solder. CD-SW BOARD FUNCTION BOARD S932 S933 DISC 2 DISC 3 S931 R957 S907 DISC 1 R958 S925 ILLUMINATION...
  • Page 57: Schematic Diagram - Function Section

    HCD-GTX88 6-26. SCHEMATIC DIAGRAM — FUNCTION SECTION — • Refer to page 69 for IC Block Diagrams. CD-SW BOARD FUNCTION BOARD R955 R956 R957 R958 R959 CN905 NO955 1.5k 1.5k 2.2k 3.3k 4.7k JL976 JL981 KEY2 KEY2 JL977 JL982 D905...
  • Page 58: Printed Wiring Board - Power Amp Section

    HCD-GTX88 6-27. PRINTED WIRING BOARD — POWER AMP SECTION — • Refer to page 37 for Circuit Boards Location. : Uses unleaded solder. MAIN MAIN SUBWOOFER BOARD BOARD BOARD BOARD CN501 CN907 CN502 NO800 (Page 48) (Page 56) (Page 48)
  • Page 59: Schematic Diagram - Power Amp Section

    HCD-GTX88 6-28. SCHEMATIC DIAGRAM — POWER AMP SECTION — POWER BOARD (Page 63) (Page 63) (Page 61) (Page 57) (Page 47) (Page 47) HCD-GTX88...
  • Page 60: Printed Wiring Board - Subwoofer Section

    HCD-GTX88 6-29. PRINTED WIRING BOARD — SUBWOOFER SECTION — • Refer to page 37 for Circuit Boards Location. : Uses unleaded solder. (Page 48) MAIN BOARD CN513 SUBWOOFER BOARD (CHASSIS) B790 CN700 TB001 CL791 CL790 R736 JW821 JW820 TB001 LP700...
  • Page 61: Schematic Diagram - Subwoofer Section

    HCD-GTX88 6-30. SCHEMATIC DIAGRAM — SUBWOOFER SECTION — SUB WOOFER BOARD IC800 STK433-130-E IC800 POWER AMP C800 C803 C853 R800 100p 100p Q800,850 OVERLOAD DETECT C808 L780 TM700 8.2p JW740 RY862 TM700 R786 1/2W SUBWOOFER R808 R736 1/2W JW760 L730...
  • Page 62: Printed Wiring Boards - Trans Section

    HCD-GTX88 6-31. PRINTED WIRING BOARDS — TRANS SECTION — • Refer to page 37 for Circuit Boards Location. : Uses unleaded solder. • Semiconductor Location PRIMARY BOARD Ref. No. Location EP1203 D1200 D1264 NO1201 L1201 CL1200 D1292 (CHASSIS) C1204 Q1200...
  • Page 63: Schematic Diagram - Trans Section

    HCD-GTX88 6-32. SCHEMATIC DIAGRAM — TRANS SECTION — (Page 59) (Page 59) (Page 47) (Page 44) HCD-GTX88...
  • Page 64 HCD-GTX88 • IC BLOCK DIAGRAMS IC401 BA5826SFP-E2 (BD91 Board) IC402 BD4929G-TR (MAIN Board (1/4)) VO1(-) VOL(-) VO1(+) LEVEL VOL(+) SHIFT VREF 13.3K LEVEL SHIFT T.S.D. REGULATOR,BIAS DROP IN4' RESET BIAS REGB REGOUT VOUT IN3' MUTE LEVEL IN2' SHIFT LEVEL SHIFT...
  • Page 65 HCD-GTX88 IC201 M61530FP-D60G (MAIN Board (2/4)) 42 FL LPFOUT FR LPFOUT FR-CH FL-CH LPF AMP LPF AMP FR LPF IN 41 FL LPF IN FR INPUT FL INPUT GAIN CONTROL GAIN CONTROL SL VOL INPUT SW SL EXTIN SL-CH R-CH...
  • Page 66 HCD-GTX88 IC563 BU4052BCF-E2 (MAIN Board (2/4)) IC564 BU4052BCF-E2 (MAIN Board (2/4)) LEVEL BINARY TO 1 OF 4 CONVERTER DECODER WITH INHIBIT IC566 TC74HC4066AFT(EL) (MAIN Board (2/4)) IC567 TC74HC4066AFT(EL) (MAIN Board (2/4)) 1I/O 1O/I 2 2O/I 3 4I/O 2I/O 4 4O/I...
  • Page 67 HCD-GTX88 IC301 HA12237F (MAIN Board (3/4)) ALC DET REC MUTE MUTE HIGH TEST I REF ON/OFF ON/OFF /NORMAL ON/OFF REC OUT(L) REC OUT(R) ALC(L) ALC(R) REC IN(L) REC IN(R) PBOUT(L) PBOUT(R) MUTE MUTE TA1(L) TA1(R) EQOUT(L) EQOUT(R) PBEQ(L) PBEQ(R) RETURN...
  • Page 68 HCD-GTX88 IC915 R5523N001B-TR-F (USB Board) 5 OUT GATE CURRENT CONTROL LIMIT 4 IN UVLO FLAG DELAY THERMAL SHUTDOWN IC1501 M65850FP-E1 (EFFECTOR Board) OSCILLATOR LPF2 1/2 VCC CLOCK AUTO MAIN 20KBIT RESET RESET CONTROL SRAM LPF1 IC1503 TC74LVX4051FT (EFFECTOR Board) 12 13 14 15 16...
  • Page 69 HCD-GTX88 IC1100 NJM4565M (MIC Board) 8 V+ A OUTPUT 7 B OUTPUT A -INPUT 6 B -INPUT A +INPUT 5 B +INPUT IC902 NJM2760V-TE2 (PANEL Board) IN1 1 BPF2OUT BPF1IN1 IN2 2 BPF1IN2 BUF1OUT 3 RECOUT BPF4OUT BPF2IN1 4 BPF3OUT...
  • Page 70 HCD-GTX88 • IC PIN DESCRIPTIONS IC101 TC94A70FG-008 (S, D) (RF AMP, FOCUS/TRACKING ERROR AMP, DIGITAL SIGNAL PROCESSOR, DIGITAL SERVO PROCESSOR, DIGITAL FILTER, D/A CONVERTER) (BD91 BOARD) Pin No. Pin Name Pin Description AVSS3 — Ground pin RFZi RF ripple zero crossing signal input...
  • Page 71 HCD-GTX88 Pin No. Pin Name Pin Description PIO3 Gate signal input from the USB controller VSS1 — Ground pin VDDT3 — Power supply pin (+3.3 V) SBSY Subcode block sync signal output to the system controller SBOK/FOK Not used in this set. (Open) Not used in this set.
  • Page 72 HCD-GTX88 IC401 M30622MEP-A75FPU0 (SYSTEM CONTROL) (MAIN BOARD (1/4)) Pin No. Pin Name Pin Description XRST Reset signal output to the digital signal processor “L”:reset MMUTE Control port for the digital signal processor motor driver mute CD CCE Chip enable contor port to the digital signal processor...
  • Page 73 HCD-GTX88 Pin No. Pin Name Pin Description CD mechanism loading motor control signal output STBY RELAY Main power on/off control signal output “H”: power on ATRIG Deck A side trigger plunger drive signal output “H”: plunger on A HALF Deck A cassette detection signal input “H”: cassette detected...
  • Page 74 HCD-GTX88 Pin No. Pin Name Pin Description LED drive signal output of SUB WOOFER ON indicator on sub woofer SW ON LED “H”: LED ON VREF A/D Converter reference voltage input (+3.3 V) AVCC — Power supply pin (+3.3 V) (for A/D conversion) HP DET Headphone connection detection signal input “H”: headphone connected...
  • Page 75 HCD-GTX88 IC901 TMP92CD28AFG-2CB4 (USB CONTROLLER) (USB BOARD) Pin No. Pin Name Pin Description RESET Reset signal input from the system controller “L”: reset PC0/INT0 Ready to send signal input from the system controller PC1/INT1 Not used in this set. Connected to ground.
  • Page 76 HCD-GTX88 Pin No. Pin Name Pin Description PF1/RXD0 Serial data signal output PF2/SCLK0/CTS0/ Serial data transfer clock signal output CLK/TB0OUT0 PF3/TXD1/SPDO Serial data signal output to the system controller PF4/RXD1/SPDI Serial data signal input from the system controller PF5/SCLK1/CTS1/SPCLK Not used in this set. (Open) PN1/SDA0/TA3OUT/SO0 Two-way EEPROM IIC data bus Not used in this set.
  • Page 77 HCD-GTX88 IC900 MB90M407PF-G-151E1 (DISPLAY CONTROL, KEY CONTROL) (PANEL BOARD) Pin No. Pin Name Pin Description 1 to 8 G16 to G23 Grid drive signal output to the vacuum fluorescent display 9, 10 P35, P36 Segment drive signal output to the vacuum fluorescent display VSS-IO —...
  • Page 78: Exploded Views

    HCD-GTX88 SECTION 7 EXPLODED VIEWS NOTE: • The mechanical parts with no reference • Abbreviation The components identified by mark 0 or dotted line with mark number in the exploded views are not supplied. AR : Argentina model 0 are critical for safety.
  • Page 79: Front Panel Section (1)

    HCD-GTX88 7-2. FRONT PANEL SECTION (1) not supplied (USB CONNECTOR board) not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-828-964-11 WIRE (FLAT TYPE) (11 CORE) A-1249-247-A MIC BOARD, COMPLETE 3-087-053-01 +BVTP 2.6 (3CR)
  • Page 80: Front Panel Section (2)

    HCD-GTX88 7-3. FRONT PANEL SECTION (2) ND900 not supplied not supplied (CD SW board) not supplied (JOG board) not supplied supplied with S935 not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-087-053-01 +BVTP 2.6 (3CR)
  • Page 81: Front Panel Section (3)

    HCD-GTX88 7-4. FRONT PANEL SECTION (3) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 2-895-499-01 WINDOW (REMOTE) 2-895-486-11 BUTTON (PLAY) 2-895-498-01 FILTER (FL) 2-895-482-01 ESCUTCHEON (STR) 2-895-496-11 BUTTON (EQ) 2-895-489-01 RING (VOLUME) 3-087-053-01 +BVTP 2.6 (3CR)
  • Page 82: Chassis Section

    HCD-GTX88 7-5. CHASSIS SECTION not supplied F1281 F1271 F1241 not supplied F1261 not supplied F1251 T1200 not supplied D658 D656 not supplied not supplied M892 not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-077-331-21 +BV 3 (3-CR)
  • Page 83: Cd Mechanism Section (1)

    HCD-GTX88 7-6. CD MECHANISM SECTION (1) (CDM74KF-K6BD91UR-WOD) M741 CD mechanism section-2 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-218-253-42 SCREW (M2.6), +BTTP 4-243-820-01 GEAR (TABLE) 1-828-938-11 WIRE (FLAT TYPE) (5 CORE) 4-243-819-01 GEAR (GENEVA) 1-687-134-12 MOTOR (TB) BOARD...
  • Page 84: Cd Mechanism Section (2)

    HCD-GTX88 7-7. CD MECHANISM SECTION (2) (CDM74KF-K6BD91UR-WOD) RE701 M751 S201 not supplied (DRIVER board) not supplied (BD91 board) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-471-035-11 MAGNET ASSY 4-224-611-01 GEAR (LOADING B) X-4955-774-2 PULLEY (SM) ASSY, CHUCKING...
  • Page 85: Electrical Parts List

    HCD-GTX88 SECTION 8 BD91 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in • Items marked “*” are not stocked since The components identified by mark 0 or dotted line with mark the parts list may be different from the they are seldom required for routine service.
  • Page 86 HCD-GTX88 BD91 CD-SW DRIVER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R110 1-216-833-11 METAL CHIP 1/10W R408 1-216-825-11 METAL CHIP 2.2K 1/10W R111 1-216-809-11 METAL CHIP 1/10W R414 1-216-829-11 METAL CHIP 4.7K 1/10W R112 1-216-809-11 METAL CHIP...
  • Page 87 HCD-GTX88 DRIVER EFFECTOR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R711 1-247-831-11 CARBON 1/4W < DIODE > R712 1-247-847-11 CARBON 4.7K 1/4W R713 1-247-863-11 CARBON 1/4W D1502 6-501-169-01 DIODE UDZW-TE17-6.2B R721 1-247-847-11 CARBON 4.7K 1/4W...
  • Page 88 HCD-GTX88 EFFECTOR FUNCTION Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1537 1-216-841-11 METAL CHIP 1/10W D910 6-500-809-01 LED SELU5223C-STP15 (USB) R1538 1-216-838-11 METAL CHIP 1/10W D912 6-500-809-01 LED SELU5223C-STP15 (M) R1546 1-216-836-11 METAL CHIP 1/10W...
  • Page 89 HCD-GTX88 FUNCTION Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R923 1-216-821-11 METAL CHIP 1/10W < SWITCH > R924 1-216-819-11 METAL CHIP 1/10W R925 1-216-817-11 METAL CHIP 1/10W S900 1-762-875-21 SWITCH, KEYBOARD (DISPLAY) R926 1-216-821-11 METAL CHIP...
  • Page 90 HCD-GTX88 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-1249-237-A MAIN BOARD, COMPLETE (E2) C251 1-126-962-11 ELECT 3.3uF A-1276-581-A MAIN BOARD, COMPLETE (AR) C260 1-162-960-11 CERAMIC CHIP 220PF A-1276-610-A MAIN BOARD, COMPLETE (AUS) C261 1-162-960-11 CERAMIC CHIP...
  • Page 91 HCD-GTX88 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C501 1-126-965-11 ELECT 22uF < CONNECTOR > C502 1-136-497-81 FILM 0.1uF C503 1-136-497-81 FILM 0.1uF CN100 1-564-706-11 PIN, CONNECTOR (SMALL TYPE) 4P C511 1-126-964-11 ELECT 10uF...
  • Page 92 HCD-GTX88 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < IC > JR347 1-216-296-11 SHORT CHIP JR349 1-216-296-11 SHORT CHIP IC101 6-703-650-11 IC M61529FP-D60G JR351 1-216-296-11 SHORT CHIP IC201 6-703-651-11 IC M61530FP-D60G JR353 1-216-296-11 SHORT CHIP...
  • Page 93 HCD-GTX88 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q584 8-729-027-56 TRANSISTOR DTC143TKA-T146 R205 1-216-821-11 METAL CHIP 1/10W Q585 8-729-026-68 TRANSISTOR 2SD2525(TP) R220 1-216-845-11 METAL CHIP 100K 1/10W Q586 8-729-230-49 TRANSISTOR 2SC2712-YG R221 1-216-834-11 METAL CHIP...
  • Page 94 HCD-GTX88 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R351 1-216-827-11 METAL CHIP 3.3K 1/10W R426 1-216-809-11 METAL CHIP 1/10W R352 1-216-827-11 METAL CHIP 3.3K 1/10W R427 1-216-809-11 METAL CHIP 1/10W R353 1-216-833-11 METAL CHIP...
  • Page 95 HCD-GTX88 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R510 1-216-830-11 METAL CHIP 5.6K 1/10W R610 1-216-833-11 METAL CHIP 1/10W (E2,E51) R611 1-216-833-11 METAL CHIP 1/10W R529 1-216-829-11 METAL CHIP 4.7K 1/10W R612 1-218-867-11 METAL CHIP 6.8K...
  • Page 96 HCD-GTX88 MOTOR (LD) MOTOR (TB) PANEL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-1249-247-A MIC BOARD, COMPLETE 1-687-133-12 MOTOR (LD) BOARD ******************** ***************** ************************************************************* < CAPACITOR > 1-687-134-12 MOTOR (TB) BOARD C1106 1-164-156-11 CERAMIC CHIP 0.1uF...
  • Page 97 HCD-GTX88 PANEL POWER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C951 1-164-156-11 CERAMIC CHIP 0.1uF R931 1-216-833-11 METAL CHIP 1/10W C952 1-164-156-11 CERAMIC CHIP 0.1uF R933 1-216-839-11 METAL CHIP 1/10W C953 1-164-156-11 CERAMIC CHIP 0.1uF...
  • Page 98 HCD-GTX88 POWER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C603 1-162-915-11 CERAMIC CHIP 10PF 0.5PF < COIL > C604 1-162-960-11 CERAMIC CHIP 220PF C605 1-164-156-11 CERAMIC CHIP 0.1uF L680 1-420-872-52 COIL, AIR-CORE C606 1-164-156-11 CERAMIC CHIP 0.1uF...
  • Page 99 HCD-GTX88 POWER PRIMARY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 0 R637 1-216-456-00 METAL OXIDE RY665 1-755-500-11 RELAY R638 1-216-845-11 METAL CHIP 100K 1/10W R639 1-216-845-11 METAL CHIP 100K 1/10W < THERMISTOR > R640 1-216-821-11 METAL CHIP...
  • Page 100 HCD-GTX88 SENSOR SUBWOOFER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-687-132-12 SENSOR BOARD Q850 8-729-924-99 TRANSISTOR 2SC3722K-E ************** < RESISTOR > < CONNECTOR > R736 1-245-711-31 CARBON 1/2W F CN731 1-785-329-21 PIN, CONNECTOR (LIGHT ANGLE) 3P...
  • Page 101 HCD-GTX88 TRANS Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-1249-262-A TRANS BOARD, COMPLETE (E2,E51) < CONNECTOR > A-1314-147-A TRANS BOARD, COMPLETE (AR) A-1314-148-A TRANS BOARD, COMPLETE (AUS) CN901 1-770-160-21 PIN, CONNECTOR (PC BOARD) 2P CN903...
  • Page 102 HCD-GTX88 USB CONNECTOR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R972 1-216-809-11 METAL CHIP 1/10W MISCELLANEOUS R973 1-216-809-11 METAL CHIP 1/10W *************** R974 1-216-809-11 METAL CHIP 1/10W R975 1-216-809-11 METAL CHIP 1/10W 1-823-718-11 WIRE (FLAT TYPE) (17 CORE)
  • Page 103 HCD-GTX88 MEMO...
  • Page 104: Revision History

    HCD-GTX88 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the top of the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2007. 06...

Table of Contents