Calling Up A Preset Ptz Point - GE TruVision DVR 30 User Manual

Chapter 4: Basic operation
Table 10: Front panel PTZ control function
Front panel key PTZ control
8 Zooms out
16 Zooms in
7 Focuses near
15 Focuses far
6 Closes iris
14 Opens iris
Enter Auto focus/iris
Esc Exits PTZ mode

Calling up a preset PTZ point

To call up a preset PTZ point:
1. Click on a camera in the mouse toolbar or use the numeric buttons to select a
camera.
2. Click the PTZ icon in the mouse toolbar or press the PTZ button to display the PTZ
control as shown in the figure below.
3. Click the Preset icon (or press 1 on the front panel or remote control) to access the
Set/Go Preset function as shown in the figure below.
4. Enter a preset number.
28 TruVision DVR 30 User Manual