TCG500, please do not hesitate to BE VERY CAREFUL WITH HOT We strongly advise you to visit the contact your local Trelawny dealer or COMPONENTS. The exhaust and Health & Safety Executive website agent.
OPERATION In addition, scarifying blocks and The TCG500 is supplied with a 240v and 415v Motors wire brushes are available which can specially commissioned electric Take particular care when using be fitted in place of the grinding motors starter switch 240v or 415v Machines, ensure that blocks.
Check that the machine has been grinding blocks or diamond discs or for the collection of concrete dust “Jacked up” (Honda engine versions add a Trelawny weight if required on and possibly toxic paint particles, petrol engine machines and recheck only) Trelawny can supply special HEPA performance and surface finish.
Page 7
Maintenance Belt Installation & Grinding Block Note: Do not use a mix of old and new Adjustment Replacement grinding blocks, this will cause rapid Switch off the engine powered wear of the new blocks and could versions and allow the engine to Removal cause the machine to become cool completely, disconnect electric...
Use above information in conjunction with the Honda Operation and Maintenance Manual. If problem has not been cured by any of the above actions, contact your local Trelawny SPT dealership for assistance.
Need help?
Do you have a question about the TCG500 and is the answer not in the manual?
Questions and answers