Table of Contents
Advertisement
Wireless antenna
Description
Antenna Kit, includes WWAN antenna auxiliary and main cables and transceivers and WLAN antenna auxiliary and main cables and
transceivers
For use only on HP Pro Slate 10 EE G1 tablet models
For use only on HP Pro Tablet 10 EE G1 tablet models
Before removing the wireless antenna, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Disconnect the battery cable from the system board (see
Remove the wireless antenna:
1.
Disconnect the WWAN auxiliary antenna cable (1) from the WWAN module auxiliary terminal.
2.
Release the WWAN auxiliary antenna cable from the retention clips (2) built into the display
panel assembly.
Back cover on page
18).
Spare part number
803379-001
804221-001
Battery on page
19).
Wireless antenna
23
Advertisement
Table of Contents
