Checking Your Vent - Whirlpool EASY CLEAN 100 Use And Care Manual

V
ENTING
.
( CONT )
4.
Use the straightest path possible when routing
5.
Use duct tape to seal all joints. Do not use
the exhaust vent. Avoid
90° turns, if possible.
Allow room when using
elbows or making turns.
Bend vent gradually to
avoid kinking.
screws to secure vent.
Lint may catch on
screws.
6.
Clean exhaust vent periodically, depending on use,
feather duster or rag attached, to clean out lint.
•
Be sure the flapper on the outside end of vent
moves freely.
•
When cleaning is complete, be sure to follow the
Installation Instructions supplied with your dryer
for final product check.

CHECKING YOUR VENT

but at least every 2 years,
or when installing your
dryer in a new location.
•
Disconnect vent from
the dryer and clean one
section at a time until
you reach the exhaust
hood.
•
Use the hose attach-
ment on your vacuum,
or a pole or wire with a
7