Removing the Coin-Cell Battery
1. Follow the procedures in
Before You
2. Turn the computer over.
3. Loosen the captive screw on the memory module/coin-cell battery cover (see
4. Disconnect the coin-cell battery cable from the system board.
1
coin-cell battery
3
battery cable connector
5. Slide the battery out of the mylar sleeve.
Replacing the Coin-Cell Battery
1. Connect the coin-cell battery cable to the system board.
2. Slide the coin-cell battery into the mylar sleeve.
3. Replace the cover and tighten the captive screw.
Back to Contents Page
Begin.
2
mylar sleeve
Bottom
View), and remove the cover.