Mitsubishi DY-1MU3E21-T Service Manual page 12

DISASSEMBLING PROCEDURES
● Disassembling procedures
In reverse of assembling procedures.
● Assembling procedures
1. Stick M008 and M010 on M013. (Follow the right figure)
2. Put PCB-MAIN to M013 and screw with Ⓐ (4 places), Ⓓ (4 places).
(Check that 4 tabs of M013 are into holes of PCB-MAIN.)
Stick M007 to PCB-MAIN. (Follow the right figure)
3. Screw M004 to M013 with Ⓐ (2 places).
4. Screw M006 to M013 with Ⓐ (3 places), Ⓑ (2 places).
No. Screw Tighten torque(N・m)
Ⓐ
3X6 0.8 +0.2/-0.1
Ⓑ 0.65 ±0.1
3X16
Ⓓ
2.6X10S 0.6 +0.2/-0.1
Ⓓ
PCB-MAIN
Ⓓ x 2
M010 : SHEET-HS
M004 : BRACKET-DECK
Ⓐ x 2
Ⓐ x 4
M007 : CUSHION-E
Ⓓ
M008 : SHEET-HS
M013 : ASSY-CHASSIS-B
M010 : SHEET-HS
M013 : ASSY-CHASSIS-B
Ⓐ x 2
Ⓑ x 2
M006 : HEAT-SINK
Ⓐ
12
Copyright (C) Mitsubishi Electric Corporation.
M010
M008 : SHEET-HS
PCB-MAIN M013
PCB-MAIN
DY-1MU3E21-T
M007
M007
M007 :
CUSHION-E
M008
M013
PCB-MAIN
M013 : ASSY-CHASSIS-B
Your company internal use only.