Mitsubishi DY-1MU3E21-T Service Manual page 10

DISASSEMBLING PROCEDURES
● Disassembling procedures
In reverse of assembling procedures.
● Assembling procedures
1. Fit tab of S2-DY on S2-PANEL. (8 places)
*Then, put FFC through A.
2. Lock FFC after screw S2-DY and S2-PANEL with Ⓒ. (4 places)
*FFC locked after bend standard of reinforcement sheet.
(Follow FIGURE 1)
S2-DY
No. Screw Tighten torque(N・m)
Ⓒ
2.6X6S 0.6 +0.2/-0.1
S2-PANEL
10
S2-DY
Copyright (C) Mitsubishi Electric Corporation.
DY-1MU3E21-T
Ⓒ x 2
Ⓒ x 2
Your company internal use only.